February 23, 2025, 5:33 am
Hey! I come from a Windows/VMware environment. Switching to proxmox for VMs and especially LXC.
I have 2 new Proxmox VE 8.3.0 nodes. Each has exact same hardware & both have a 256GB nvme (for Proxmox install) and a WD Red 2TB SSD (for VMs, CTs etc).
ISOs are accessed via NFS share from a QNAP NAS.
I've setup a few VMs when I came across the inability to Snapshot "current guest config does not support snapshots". Seems in both nodes the 2TB disks were added as /dev/sda and as LVM. I'm...
Read more
↧
February 23, 2025, 5:44 am
Heya, can somebody confirm that passthrough with this onboard Radeon is working...and how?
Mainboard: ASUS B650-PLUS, BIOS 3067 12/10/2024
In the past I really hated the passthrough with Vega64 because of the reset bug. Not nice, but it worked. Switched to GTX 1050 Ti, worked better, arranged with the lesser performance (no games).
Now first passthrough attempts with this new hardware (ASUS B650-PLUS) resulted in crashes/black screen/nothing. I am reusing my GTX 1050 Ti right now, but if...
Read more
↧
↧
February 23, 2025, 6:10 am
Hi, I'm very new to Proxmox, I have just set up an Asus NUC to run my smart home in a VM, a Windows DC in a VM and Pi-Hole in a container. I like it and am now thinking of reconfiguring my Windows server to be another Proxmox node.
I currently have
Windows Server 2019 (Physical box)
- SSD (OS Disk)
- Adaptec 6405
- Raid 10 array - Pictures, documents etc (NTFS)
- Raid 10 array - VMs (NTFS)
- Hyper-V
- One VM Windows Server 2019 Domain Controller
- Shared Folders...
Read more
↧
February 23, 2025, 6:16 am
Good Morning everyone,
I'm using 2 -1TB SSD's in a ZFS pool called TANK1TB (I never put any data in it ) but this morning I notice the status was degraded, it has no checksum errors, so is there anyway I can fix this? If not can I use the export command to just remove it completely for proxmox storage / the entire system? Also what command would be used to fix besides 1. zpool clear
2. zpool offline. Would it be better to remove from cmd line or the web interface.
↧
February 23, 2025, 6:39 am
Hello,
I recently upgraded to Proxmox VE 7.1-10 and am now receiving a 401 error when authenticating with Azure AD OpenID:
I am redirected to Microsoft and the Azure AD logs state that the authentication was successful. However, I cannot log in. This seems to be restricted to Azure AD as I have another instance using Keycloak and I can log in fine. I can only see the following line in /var/log/syslog:
pvedaemon[137919]: openid authentication failure; rhost=<redacted> msg=Failed...
Read more
↧
↧
February 23, 2025, 6:16 am
We have been using
ceph on our
Proxmox (uptodate) with version 19.2.0 as in:
Bash:
sudo ceph --version
ceph version 19.2.0 (16063ff2022298c9300e49a547a16ffda59baf13) squid (stable)
But our
radosgw server was running on Debian, and, we just discovered recently that the version used there was not the same:
Bash:
sudo ceph --version
ceph version 16.2.15 (618f440892089921c3e944a991122ddc44e60516) pacific (stable)
We have been having (actually are still having) issues...
Read more
↧
February 23, 2025, 6:41 am
Hi, I recently rebooted my
Proxmox server, and after the reboot, I can no longer access the
web interface or
ping external sites.
pveversion - pve-manager/8.3.4/65224a0f9cd294a3 (running kernel - 6.8.12-8-pve)
lspci
does show the ethernet controller:
Realtek RTL8111/8168/8481 PCI express Gigabit Ethernet Controller
What I Noticed:
- Running
ip a
does not show my physical network interface (enp2s0), which previously...
Read more
↧
February 23, 2025, 7:08 am
Trying to install server 2025 and proxmox can't find a disk, what driver should be used
Keith
↧
February 23, 2025, 7:10 am
Hi everyone,
I have a home server with four Samsung SSD 980 PRO 1TB drives. I installed Proxmox VE and set up
rpool as a mirror using two of the drives. This gives me a 1TB
rpool. My question is:
Is it okay to create VMs on rpool? I’ve read that it’s not recommended, but I’d like to understand why and hear your thoughts.
Here are the potential downsides I’ve come across:
- Risk of filling the root partition: Storing VMs on rpool could lead to running out...
Read more
↧
↧
February 23, 2025, 7:16 am
Hallo!
Ich bin beim Konzept noch unsicher...
Es scheint nicht ganz trivial zu sein, verschiedenen unprivileged LXCs gemeinsame samba shares zu verpassen.
Trotzdem ist das hier eine Heim-Lösung und keine 1000+ User Company.
Aufgabe:
Es laufen samba, nextcloud und paperless
Ein MFD Drucker kann scannen auf Windows-Shares.
Er kann Dokumente und Bilder scannen und das auf zwei unterschiedliche Laufwerke.
Primär möchte ich natürlich Dokumente scannen, gelegentlich auch Bilder. Daher soll der...
Read more
↧
February 23, 2025, 7:16 am
Hi all, I've setup both Win11 and Linux Mint VM on PVE latest version, and also performed "apt install libgl1 libegl1" on host
Then I've chose VirGL for both VM. But seems I cannot get h264/h265 capability on both machine.
Why I assume I do not have those encoding, because I use Rustdesk to remote in the machine, and Rustdesk have h264/h265 encoding available if I switch to use GPU passthrough on Win11 VM. But then I switch back to VirGL, those options went away.
On Linux Mint VM...
Read more
↧
February 23, 2025, 8:03 am
I tried to load some templates using the shell command "pveam update". it said everything was successful, but when I went to create a container, I only see one option listed "debian-12-standard_12.7-1_amd64.tar.zst". Shouldn't there be more installed or do I need to load them a different way?
↧
February 23, 2025, 8:14 am
Hi.
I am helping a friend setup a server that will run Proxmox.
Can I get some guidance and best possible setup for the following hardware configuration on Dell PowerEdge T550 server.
2 CPU - Intel Xeon Silver 4309Y 8C/16T
128gb MemoryPERC H755 SAS Raid Controller
2 x 3.84TB SSD SAS ISE (Primary active storage) (configure as Raid 1 mirror)
4 x 8TB 7.2K RPM SAS ISE (storage drive possibly setup as raid 1 mirror)
Broadcom 57416 Dual Port 10GbE BASE-T
Broadcom 5720 Dual Port 1GbE BASE-T...
Read more
↧
↧
February 23, 2025, 8:14 am
Hey everybody,
I can't quite wrap my head around how many users are necessary for sync jobs in push-direction in this setup:
PBS1 has 5 datastores with snapshots from different sources in them.
PBS2 also has 5 datastores which contain mirrors of all snapshots from their equivalent datastores on PBS1.
Right now, this is set up with sync jobs in pull direction on PBS2. Those sync jobs use a single user on PBS1 and a single remote config on PBS2.
Now that sync jobs in push direction are...
Read more
↧
February 23, 2025, 9:15 am
Hi *.*
Im new to Proxmox - and it seem to me that when using more that one Proxmox server in a setup - the only way to run HA setup would be with Ceph cluster
so I have 4 node - each with 2 nic. Nic1 is public 192.x.x.x/24 - connect to switch 1. Nic 2 is private 10.x.x.x/24 - connected to switch2 ( standalone - no access anywhere )
gateway is at 192.x.x.x
how to I setup route for this ?
I can ping the rest of my network 192.x.x.x/24
But i can't ping or get to 10.x.x.x
I would like...
Read more
↧
February 23, 2025, 7:38 am
I tried to move my ceph network to another subnet and now all osd's are not picking up the new network and staying down. I fear i may have hosed ceph, but as a learning experience, would like to see if i can recover them. this is what they look like in the cluster:
this is the contents of the new ceph.conf
Code:
[global]
auth_client_required = cephx
auth_cluster_required = cephx
auth_service_required = cephx
fsid = b6005ee3-c72c-4fad-8c48-3b4be1a3cb07...
Read more
↧
February 23, 2025, 10:02 am
We’re excited to announce the alpha preview of Proxmox Datacenter Manager! This is an early-stage version of our software, giving you a first impression at what we’ve been working on and a chance to collaborate.
What's Proxmox Datacenter Manager?
The Datacenter Manager project has been developed with the objective of providing a centralized overview of all your individual nodes and clusters. It also enables basic management like migrations of virtual guests without any cluster...
Read more
↧
↧
February 23, 2025, 10:17 am
PCI Passthrough has been discussed many times, but I cannot find information on my use case. I have gotten PCI Passthrough to work on my previous system just fine when passing a HBA to my OpenMediaVault VM with PVE 5.3.
On my current system, I installed PVE 6.1 and hit a snag. I now have two of the same HBA controllers in the system. Both are good ol' SAS2008 LSI controllers using the same driver and have the same vendor ID codes. The only way to distinguish them is the Bus ID's. One of the...
Read more
↧
February 23, 2025, 10:20 am
I've been searching and most of what I've found suggests installing NUT, connecting the UPS to the Proxmox server by USB and using that as the UPS host. This is not what I want to do.
I have an existing UPS (APC) with a network card and have several other servers running off it (it's big) that all connect by network. I would like to add Proxmox as a connected server, so network shutdown will work on all devices without a USB connection. Can anyone make a suggestion on how to accomplish...
Read more
↧
February 23, 2025, 10:25 am
↧