We have upgrade more than 20 servers to Proxmox 3.3.x and noVNC runing very well but ... the Copy Paste icon appear shortly then disappear, copy paste not working as well. Any thought?
↧
noVNC: copy paste not works
↧
Need help Lvmthin volume will not load
Lvm thin fails on boot.
Error code 1
I believe it is because I didn't select discard when I set up the VM and the metadata is full...also my newbie floundering.
Normally it wouldn't be an issue, but I moved to a larger SSD that was my backup drive a few days ago and hadn't made a new backup yet (id10t error). I took a couple of snapshots and those are useless as they are in the container that won't load.
I've searched everywhere I can think of and have tried adding an extra disk through...
Read more
Error code 1
I believe it is because I didn't select discard when I set up the VM and the metadata is full...also my newbie floundering.
Normally it wouldn't be an issue, but I moved to a larger SSD that was my backup drive a few days ago and hadn't made a new backup yet (id10t error). I took a couple of snapshots and those are useless as they are in the container that won't load.
I've searched everywhere I can think of and have tried adding an extra disk through...
Read more
↧
↧
Backing Up Proxmox with Veeam
Hello! I swear that I've done this before but for some reason on my new Proxmox 8.1.4 system I'm having trouble installing Veeam and backing up the OS. I first tried to install Veeam like I normally do on Linux systems (command below) but when I ran a backup I get the error
I tried unstalling the veeam package and reinstalling with the veeam-nosnap package and now I'm getting
Is...
Read more
Code:
Veeam snapshot kernel module not found
Code:
Insufficient free space for a snapshot in a volume group: pveRead more
↧
Proxmox VE 8.1: booting into GNU GRUB after apt-get update & upgrade
Hi all,
I'm pretty new to Proxmox started in January learning about how to use it on older hardware. Decided to buy new components to build a decent server.
Today after one month of use it decided to stop booting. I did apt-get install update and apt-get install upgrade and after a reboot I get the following grub screen:
----------------------------------------------------------------------------
GNU GRUB version 2.06-13+pmx1
Minimal BASH-like line editing is supported. For the first...
Read more
I'm pretty new to Proxmox started in January learning about how to use it on older hardware. Decided to buy new components to build a decent server.
Today after one month of use it decided to stop booting. I did apt-get install update and apt-get install upgrade and after a reboot I get the following grub screen:
----------------------------------------------------------------------------
GNU GRUB version 2.06-13+pmx1
Minimal BASH-like line editing is supported. For the first...
Read more
↧
Window 10 VM freezes using SPICE from another Windows 10 PC
Hi, I have a very specific issue that I'm banging my head against. Whenever I set up a Windows 10 VM on PVE following the best practices, configure it to use SPICE for video, then try to connect from a physical Windows 10 PC using virt-viewer, the VM will lock up within minutes. If I use noVNC from the same physical PC, no lock ups. If I access the VM from a Linux machine using virt-viewer or noVNC, no lockups. It's only accessing a Windows 10 VM from a Windows 10 PC using SPICE that...
Read more
Read more
↧
↧
Intel NIC e1000e hardware unit hang
This has been discussed many times, is there a solution/workaround yet, as the specified steps are not working for me?
I've the following in /etc/network/interfaces
Read more
I've the following in /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
iface eno1 inet manual
offload-gso off
offload-gro off
offload-tso off
offload-rx off
offload-tx off
offload-rxvlan off
offload-txvlan off
offload-sg off
offload-ufo off
offload-lro off
auto vmbr0
iface vmbr0 inet...Read more
↧
Several remote Standalone PVE - Central Management
Comparing to Vmware, Hyper-v, RHEV, and other solutions...
Beyond managing a cluster, central manager(Ex.: Vmware vCenter, Windows server manager.) is also good for safety and easily maintaining several remote node of virtualization.
It gives us centralized configuration, and monitoring.
Allowing to easily maintaining, with 5-6 guys on the team, all the nodes with day-by-day operations.
Of course, when some issues occurs with the remote node, the operation needs to be specific on that...
Read more
Beyond managing a cluster, central manager(Ex.: Vmware vCenter, Windows server manager.) is also good for safety and easily maintaining several remote node of virtualization.
It gives us centralized configuration, and monitoring.
Allowing to easily maintaining, with 5-6 guys on the team, all the nodes with day-by-day operations.
Of course, when some issues occurs with the remote node, the operation needs to be specific on that...
Read more
↧
Decrease a VM Disk Size
Hey,
I'm still new to proxmox and I wanted to know how I could decrease the size of a VM's Disk.
This is the specs of the VM
![Screenshot_20230208_021715.png]( "Screenshot_20230208_021715.png")
Within the Linux Ubuntu Server, it shows the following:
![Screenshot_20230208_021959.png]( "Screenshot_20230208_021959.png")
![Screenshot_20230208_022007.png]( "Screenshot_20230208_022007.png")
![Screenshot_20230208_022017.png]( "Screenshot_20230208_022017.png")
Any help would be greatly appreciated.
Thank you!!
I'm still new to proxmox and I wanted to know how I could decrease the size of a VM's Disk.
This is the specs of the VM
Within the Linux Ubuntu Server, it shows the following:
Any help would be greatly appreciated.
Thank you!!
↧
Error after upgrading kernel 6.8.X
Hi, i have proxmox installed in a Hp Gen8 Microserver.
This is the error after upgrading kernel to 6.8
![error.jpg]( "error.jpg")
if i pin kernel 6.5.13-5 all is ok.
Why?
Thanks!
This is the error after upgrading kernel to 6.8
if i pin kernel 6.5.13-5 all is ok.
Why?
Thanks!
↧
↧
DNS settings not working
Hello, i cant connect to anything because my DNS settings are not working
Search domain: proxmox.local
DNS Server 1: 8.8.8.8
DNS Server 2: 8.8.4.4
/etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.2.188 proxmox.local proxmox
/etc/hostname
proxmox
ping 8.8.8.8
From 192.168.2.188 icmp_seq=** Destination Host Unreachable
I also cant ping my gateaway ^^Same Message
Any help is appreciated
Search domain: proxmox.local
DNS Server 1: 8.8.8.8
DNS Server 2: 8.8.4.4
/etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.2.188 proxmox.local proxmox
/etc/hostname
proxmox
ping 8.8.8.8
From 192.168.2.188 icmp_seq=** Destination Host Unreachable
I also cant ping my gateaway ^^Same Message
Any help is appreciated
↧
Adding a node to a cluster without affecting quorum
I have a three node cluster set up with HA and working great. I'd like to add a fourth node to the cluster to consolidate management and to allow easy VM migration, but without affecting quorum. Meaning: the three nodes and the fourth node would not wait for the other to boot before operating normally. The three original nodes would still vote for themselves, not affecting the fourth node. Is such a configuration possible?
↧
timed out for waiting the udev queue being empty
timed out for waiting the udev queue being empty
Gave up waiting for root file system device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/mapper/pve-root does not exist. Dropping to a shell!
(initramfs)![S__92413956.jpg]( "S__92413956.jpg")
Gave up waiting for root file system device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/mapper/pve-root does not exist. Dropping to a shell!
(initramfs)
↧
Help with slow ZFS performance?
I have a single node with 2 ZFS pools. I am trying to restore a 2gb LXC backup which is stored on one of the ZFS pools, and after 15+ min it still does not complete. Its been awhile since I have had to restore a backup but I dont think it was nearly this slow in the past.
I restarted the host, and even that process was slow and took several minutes. It looks like the cause of the slow restart was mostly due to mounting the ZFS pool, see errors below. When I was setting the system up a...
Read more
I restarted the host, and even that process was slow and took several minutes. It looks like the cause of the slow restart was mostly due to mounting the ZFS pool, see errors below. When I was setting the system up a...
Read more
↧
↧
RAID1
Hey guys,
I have 2 SSD hard drives and two HDD hard drives. SSD hard drives are 500 GB each and HDD hard drives are 4 TB each. HDDs are RAID 1 in BIOS. I have installed proxmox . I have selected only 500 GB SSD during installation for this virtual machine. Now I want to add these 4 terabytes to the virtual machine.
I have 2 SSD hard drives and two HDD hard drives. SSD hard drives are 500 GB each and HDD hard drives are 4 TB each. HDDs are RAID 1 in BIOS. I have installed proxmox . I have selected only 500 GB SSD during installation for this virtual machine. Now I want to add these 4 terabytes to the virtual machine.
↧
Memory leakage of one of my cluster nodes
I have a cluster of 3 machines, of which 2 are somewhat identical. All running pve-manager/8.2.4/faa83925c9641325
The one that has no VMs running actively on it, has a memory usage of approx 50%.
Whereas the other one with 2 VMs, has approx 18%.
Something is clearly wrong but don't know how to find out.
The one that has no VMs running actively on it, has a memory usage of approx 50%.
Whereas the other one with 2 VMs, has approx 18%.
Something is clearly wrong but don't know how to find out.
↧
Problem snapshotting VMs with current PVE version (2024-06-27) using pve-qemu-kvm >= 8.2
I have just updated some PVE instances to the newest kernel 6.8.8-2-pve and observe a strange new behaviour which I cannot fully lay my hands on:
When I snapshot my VMs, some of them will get a snapshot, but afterwards, they stay shut down. Some VMs do this, some do not and I cannot see any notable difference.
This problem was seen on both LVM- and ZFS-based PVE instances just after I rebooted them into kernel 6.8.8-2-pve yesterday. My first guess was that the kernel was the culprit, but...
Read more
When I snapshot my VMs, some of them will get a snapshot, but afterwards, they stay shut down. Some VMs do this, some do not and I cannot see any notable difference.
This problem was seen on both LVM- and ZFS-based PVE instances just after I rebooted them into kernel 6.8.8-2-pve yesterday. My first guess was that the kernel was the culprit, but...
Read more
↧
Unable to boot second Windows VM (GPU passthrough)
TLDR: I have 1 working Windows 11 VM with GPU passthrough. Tried to create a new VM with same config but the new one doesn't boot.
About 2 years ago I created a Windows 11 VM with GPU passthrough (Followed every possible blog/thread out there to get it working) and I've been using it since (It's off most of the time, I start it once in a while when I want to play some games). Now, I'm working on automating the deployment of said VM, but the new VM does not start. I see this message in the...
Read more
About 2 years ago I created a Windows 11 VM with GPU passthrough (Followed every possible blog/thread out there to get it working) and I've been using it since (It's off most of the time, I start it once in a while when I want to play some games). Now, I'm working on automating the deployment of said VM, but the new VM does not start. I see this message in the...
Read more
↧
↧
Unsurpassed Сasual Dating - Real-life Females
Experience carefree connections with the top-rated site for casual dating adventures.
Verified Females
Prime casual Dating
Verified Females
Prime casual Dating
↧
HM90 Proxmox regelmäßig nicht erreichbar
Hallo Leute,
Ich habe einen Minisforum PC mit 32Gb Ram und einem AMD Ryzen 9 4900H und einer 512 Gb ssd. Leider ist alle 1-2 Wochen der PC nicht mehr erreichbar und es hilft nur mehr ihn stromlos zu machen und dann wieder einschalten. Verwende den PC für ioBroker.
Hat einer eine Idee woran das liegen könnte? Heute um 04:34 ist die Kiste wieder abgeschmiert![:(]( "Frown :(")
LG Peter
![2024-05-27 09_09_15-Window.png]( "2024-05-27 09_09_15-Window.png")
Read more
Ich habe einen Minisforum PC mit 32Gb Ram und einem AMD Ryzen 9 4900H und einer 512 Gb ssd. Leider ist alle 1-2 Wochen der PC nicht mehr erreichbar und es hilft nur mehr ihn stromlos zu machen und dann wieder einschalten. Verwende den PC für ioBroker.
Hat einer eine Idee woran das liegen könnte? Heute um 04:34 ist die Kiste wieder abgeschmiert
LG Peter
Code:
May 26 23:07:21 proxmox pveproxy[1146]: starting 1 worker(s)
May 26 23:07:21 proxmox pveproxy[1146]: worker...Read more
↧
pbs replication
Hi community,
I want to set up an efficient offsite backup, so I have a PBS (A) on the network that I want to be backed up by the offsite PBS (B).
Unfortunately, the internet connection is rather mediocre (I'm in Germany after all ;-).
Now I thought of the following scenario:
- B is initially plugged into the network to be synchronized and "initialized" with data.
- B is unplugged and plugged into the offline network.
- B pulled A is now acceptable over a slow connection because of...
Read more
I want to set up an efficient offsite backup, so I have a PBS (A) on the network that I want to be backed up by the offsite PBS (B).
Unfortunately, the internet connection is rather mediocre (I'm in Germany after all ;-).
Now I thought of the following scenario:
- B is initially plugged into the network to be synchronized and "initialized" with data.
- B is unplugged and plugged into the offline network.
- B pulled A is now acceptable over a slow connection because of...
Read more
↧