need to break up proxmox 3.3-1 2 nodes cluster into two stand alone promox nodes
I need to break up (proxmox 3.3-1) 2 nodes cluster into two stand alone proxmox nodes. I want to retain all the vm's on both nodes. I have node1 and node2. Node1 is master node. from master node1 I...
View Articlentp service missing in 4.0 install
I installed 4.0 from the beta ISO and upgraded it via apt-get to version pve-manager/4.0-26/5d4a615b. I did this on two machines and on a vmware virtual machine, and all exhibited this omission. There...
View ArticleIP alias
Hi All, I've spent most of the day trying to accomplish adding a second WAN IP to my machine so as to do SSL offloading for multiple sites using haproxy. Both IPs have the same subnet etc. After some...
View ArticleProxmox 4 beta1 - Block Device with Serial Number
Hi guys, I'm trying to pass along /dev/sdb to my guest as a virtio device using 'qm set 100 -virtio0 /dev/sdb' which seems to work. But I'd like to pass along the serial number of the drive as well. So...
View ArticleClik here to view.
Problem with configuration Network in centos on proxmox
Hello! I'm starting their adventure with proxmox and needs your help, I have a little time and do not know quite what's going on. I have a problem to connect to the Internet centos. I know the basics,...
View ArticleHP Microserver Gen8 and ZFS Grub Problems
Hi, i installed a Raid1 Mirror with ZFS with Proxmox 3.4 ISO. I surely rebooted 5 times without Problems. Now I am always booting to Grub Rescue Console and I have no Idea why. At the Moment I moved...
View ArticleProxmox GUI backup dialog wont open
Hello, I have problem with backup now function. When I click backup now I should see Output log, but this does not appear. Also I don't see task executed in tasks log. Whitch logs shloud I look into to...
View Articlevps.umount is not executed
Hello, I'am using proxmox pve-manager/3.4-9/4b51d87a (running kernel: 2.6.32-40-pve) I put a vps.mount and a vps.umount scripts in /etc/vz/conf Code: # ls -la /etc/vz/conf/ total 2 drwxr-x--- 2 root...
View ArticleKCM guest SLES 11 SP2 only working with ide? no virtio possible?
Hi, i was wondering, if by any chance it was possible to change the harddisk bus from ide to virtio in a SLES 11 KVM guest. It just doesn't seem t o boot properly with virtio, as assumingly ther's no...
View ArticleHost handles network packets for the guest
English: Hi, I have the problem that packets which are actually intended for a guest system , arrive at the host . I have several web servers running on the host and in irregular packets are forwarded...
View ArticleAfter a clean Proxmox 3.4 install, proxmox stops responding
Hi, After upgrading to 3.4 with a clean install, server started to hang on frequently. Syslog is filled with "Blabla blocked for more than 120 seconds" errors. any help is appreciated. Thanks Code: Aug...
View ArticleFilesystem type 'simfs' is not supported.
Good day: I just installed a container using debian-7.0-x86_64-minimal.tar.gz template on a proxmox 3.4-9 server, now when the container boots this is the output on console. Code: mountall: Event...
View Articlekernel - for_each_process
Hi, I'm trying to install sysdig and hit an error with its compilation. The software author identified the problem as being: your version of the kernel is patched in a way that doesn't provide the...
View ArticlePVE 4.0 beta 1 - Spice over IPv6 isn't working for me
Hi, Spice over IPv6 on PVE 4.0 beta 1 does not appear to work. It isn't listening on my hosts: ~# netstat -ntlp | grep spiceproxy tcp 0 0 0.0.0.0:3128 0.0.0.0:* LISTEN 7140/spiceproxy And when I try to...
View ArticleInstall ProxMox VE 3.4 from USB !!
It can't mount the driver and install de ProxMox, how i can solve this problem ? Thx for advance !!!
View ArticleShare same iscsi lun
Hello everyone, I have 3 proxmox in a cluster and I need to share the same lun among the 3 of them, I was able to register the same lun on the 3 proxmox and also able to create a LVM from the iscsi and...
View ArticleLXC - Cannot assign a block device to container
I want to passthrough my /dev/sdb to a LXC container running OpenMediaVault. Running Code: # lxc-device add -n 102 /dev/sdb Seems to work perfectly, and /dev/sdb is visible in the container....
View ArticleUsing internal network for cluster
Hi, It seems proxmox defaults on using the public ip address. Is changing this to internal only way to do via hosts? Do i need just hostname or FQDN (hostname.domain.com) entries in there? What are the...
View Article