Quantcast
Channel: Proxmox Support Forum
Viewing all 171704 articles
Browse latest View live
↧

Problem on server4you root server with proxmox

December 10, 2013, 7:34 am
$
0
0
Hello,

i have to test a new server rented by server4you, i installed debian 7 minimal on it.
Than i installed Proxmox via this way:

http://pve.proxmox.com/wiki/Install_..._Debian_Wheezy

Here is the actual output of my current system

pveversion -v
proxmox-ve-2.6.32: 3.1-114 (running kernel: 2.6.32-26-pve)
pve-manager: 3.1-24 (running version: 3.1-24/060bd5a6)
pve-kernel-2.6.32-26-pve: 2.6.32-114
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-2
pve-cluster: 3.0-8
qemu-server: 3.1-8
pve-firmware: 1.0-23
libpve-common-perl: 3.0-9
libpve-access-control: 3.0-8
libpve-storage-perl: 3.0-18
pve-libspice-server1: 0.12.4-2
vncterm: 1.1-6
vzctl: 4.0-1pve4
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-17
ksm-control-daemon: 1.1-1
glusterfs-client: 3.4.1-1


I can connect to the web interface via "my.ip:8006" and also can login.

Ok than comes the first Error: "that i dont have an Subscription to Proxmox" ???

Ok i just ignored that first Error, and downloaded an Template of Debain for openVZ!

Next i tried to create an Container, and there comes the Problems: "I cant create an Container!!"

vzquota : (error) Quota on syscall for id 100: File exists
vzquota : (error) Native quota is already running for this partition.
vzquota on failed [3]
Creating container private area (/var/lib/vz/template/cache/debian-7.0-standard_7.0-2_i386.tar.gz)
vzquota : (error) Quota is not running for id 100
vzquota : (error) Quota on syscall for id 100: File exists
vzquota : (error) Native quota is already running for this partition.
vzquota on failed [3]
Creation of container private area failed
TASK ERROR: command 'vzctl --skiplock create 100 --ostemplate /var/lib/vz/template/cache/debian-7.0-standard_7.0-2_i386.tar.gz --private /var/lib/vz/private/100' failed: exit code 60

i have tested with some container, everytime failed with code: 60!

When i check to see if there was a container created under /var/lib/vz/"root & private" there is no container ID!

Anyone an Idea?
↧
Search

VM Console and default screen size

December 10, 2013, 11:04 am
$
0
0
I'm installing a few Windows 8 workstations and Server 2012 as VMs.

I can connect to them 'ok' using the console. However the default screen resolution is 'too small' - some of the install dialog is hidden to the right and below of the frame.

How can I change the default 'screen resolution' of the console window?
↧
↧

[SOLVED] SSH connection on Proxmox host suddenly slow

December 10, 2013, 11:11 am
$
0
0
Hi Guys,

For exactly a week ago, I started to have some issues with my Proxmox host.

Suddenly SSH connection to the host was slow. It can take up to 30 secs before login. When logged in, everything runs ok.
I have a few webservers running inside KVM. Suddenly they also got problem connecting with MySQL from server to server.

Have you seen such behavior before?

I have googled it, and found that the issue might be hostname lookup. If I do deactivate hostname lookup inside sshd_config and my.cnf, then I can connect speedy Again - but isn't it weird that this issue suddenly appeared?
I have never deactivated hostname lookup in any environment - even though we are talking internal servers with internal host names (no DNS). But haven't had the issue before a week ago.


Hope you have some hints :)
↧

Network config problem

December 10, 2013, 12:08 pm
$
0
0
Hi,

My server has two network cards. I want to connect the server two diferent network.
When I create new bridge (vmbr1) and set up gateway i get error message : Parameter verification failed. (400)

gateway: Default gateway already exists on interface 'vmbr0'.

It is possible what I want?

Thanks.
↧

Proxmox and Imaging

December 10, 2013, 1:01 pm
$
0
0
I just imaged 30+ Computers using Proxmox 3.1 with OmniOS, (FOG and pfSense) KVM.
The images took about 9 minutes for 60GB. All the images were done at the same time. I don't think you can say Proxmox is not production ready.
May not be a big deal, but for 6 - 3tb Hitachi Drives, working in such a beautiful workflow, it sure enough makes me excited in all the right places.

This is my story... until the servers start smoking :cool:

proxmox_imaging.PNG DSCN01.jpg
Attached Images
↧
↧

ARC-12x4 support is missing

December 10, 2013, 2:24 pm
$
0
0
I just tried to install the latest proxmox 3.1 ISO but the kernels fails to detect my ARC-1224 controller. Looking at the source of the proxmox kernel it seems there is arcmsr.1.20.0X.15-110330.zip included but this release is missing support for the ARC-12x4 controller. Any change that the release arcmsr.1.20.0X.15-110330.zip will be included soon?

I will recompile the promox kernel tomorrow but it would be much easier if the current ARECA driver release will be included soon.

And thanks for the great product.
↧

Missing local .iso files in web interface?

December 10, 2013, 3:41 pm
$
0
0
Hi - I just went to create a new VM on a proxmox server I installed several months ago, and was surprised that the .iso files I'd previously uploaded were not visible when trying to use an .iso image as a CD/DVD option.

I only use local storage, and no images are visible in the "Content" tab on local storage.

However from the command line, it looks as if the images are still there:

root@pm02:/var/lib/vz/template/iso# ls -al
total 1371972
drwxr-xr-x 2 root root 4096 Dec 11 09:01 .
drwxr-xr-x 5 root root 4096 Jun 11 2013 ..
-rw-rw-rw- 1 root root 715644928 Jun 12 14:25 ubuntu-10.04.1-server-amd64.iso
-rw-rw-rw- 1 root root 687865856 Jun 12 14:54 ubuntu-12.04.2-server-amd64.iso

I tried uploading an additional .iso, but it just times out. The VM I had previously installed on the PVE is working just fine, but am a bit perturbed that I am now unable to install others. Any pointers? Output from pveversion -v follows - thanks in advance

Mark


root@pm02:/var/lib/vz/template/iso# pveversion -v
pve-manager: 3.0-23 (pve-manager/3.0/957f0862)
running kernel: 2.6.32-22-pve
proxmox-ve-2.6.32: 3.0-107
pve-kernel-2.6.32-20-pve: 2.6.32-100
pve-kernel-2.6.32-22-pve: 2.6.32-107
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-2
pve-cluster: 3.0-8
qemu-server: 3.0-20
pve-firmware: 1.0-23
libpve-common-perl: 3.0-8
libpve-access-control: 3.0-7
libpve-storage-perl: 3.0-8
vncterm: 1.1-4
vzctl: 4.0-1pve4
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-13
ksm-control-daemon: 1.1-1
↧

API Call - Get VM info

December 10, 2013, 3:52 pm
$
0
0
Is there an API call to get the load, RAM usage, bandwidth usage, et cetera for a KVM VPS? Either in a list for the node or on an individual VM basis. Either will work.
↧
Search

[HA Two Nodes] no Shared Storage

December 10, 2013, 7:55 pm
$
0
0
Hello, i am trying to configure my Cluster which have 2 nodes in it with HA.
but unfortunately i don't have any storage share like NFS, FC, iSCSI etc.

I only have 2 nodes with :
2TB Hardisk configured RAID 1 in each node.

So my question, is it possible to configure HA in my condition ?

Thanks
↧
↧

Remove one host from cluster...

December 10, 2013, 11:49 pm
$
0
0
Hi,

I have 1 little cluster, proxmox 2.1 based on 2 host (no HA).
I need to clean upgrade one host (the other one follow later).

So I move all VM on host1 and now I'm prepared to remove Host2 from the cluster and reset the server.

My goal is to install Proxmox 3.1 and move all the VM's on this new host (from a backup on a NAS) so I can format also the primary server (Host1)...

I'm reading now this guide: https://pve.proxmox.com/wiki/Proxmox_VE_2.0_Cluster
and it seems very scary regarding removing host from a cluster, there's some other advice that must I follow in this procedure?
It is safe to remove one host from the cluster and then reset?

Thanks in advance.
↧

cpu0 unhandled wrmsr: 0x680 data 0 [What does it mean?]

December 11, 2013, 1:15 am
$
0
0
Hello,

Can someone please give some light as to what those errors mean?
>>
Dec 11 09:08:38 server01 kernel: __ratelimit: 55 callbacks suppressed
Dec 11 09:08:38 server01 kernel: kvm: 175991: cpu0 unhandled rdmsr: 0x345
Dec 11 09:08:38 server01 kernel: kvm: 175991: cpu0 unhandled wrmsr: 0x680 data 0
Dec 11 09:08:38 server01 kernel: kvm: 175991: cpu0 unhandled wrmsr: 0x6c0 data 0
Dec 11 09:08:38 server01 kernel: kvm: 175991: cpu0 unhandled wrmsr: 0x681 data 0
Dec 11 09:08:38 server01 kernel: kvm: 175991: cpu0 unhandled wrmsr: 0x6c1 data 0
Dec 11 09:08:38 server01 kernel: kvm: 175991: cpu0 unhandled wrmsr: 0x682 data 0
Dec 11 09:08:38 server01 kernel: kvm: 175991: cpu0 unhandled wrmsr: 0x6c2 data 0
Dec 11 09:08:38 server01 kernel: kvm: 175991: cpu0 unhandled wrmsr: 0x683 data 0
Dec 11 09:08:38 server01 kernel: kvm: 175991: cpu0 unhandled wrmsr: 0x6c3 data 0
Dec 11 09:08:38 server01 kernel: kvm: 175991: cpu0 unhandled wrmsr: 0x684 data 0

Thank you
↧

No SPICE graphics card selectable in PVE 3.1

December 11, 2013, 5:23 am
$
0
0
Hi all,

according to this document

http://pve.proxmox.com/wiki/SPICE

I should be able to select the SPICE graphics card in a PVE 3.1 environment.
However, this device does not show up. Just the default, Cirrus, VGA and VMWare cards are available...


Do I still need the pvetest repositories in order to get it working or what else am I missing?


Cheers,

alex
↧

New cron.d entry not working

December 11, 2013, 5:45 am
$
0
0
Hi,

I created a file called cluster.cron in /etc/pve. Because of where it's placed, the file is duplicated to all servers in my cluster.

I then create a link in /etc/cron.d on all my servers to the file in /etc/pve. Just like the vzdump.cron file is done.

In my cluster.cron, I put:

* * * * * root date >> /tmp/date

basically every minute, put the date into a file.

The cron never gets executed. Any ideas what is going on?

Gerald
↧
↧

Can't upload ISO images on proxmox server

December 11, 2013, 10:27 am
$
0
0
Hi everyone,

My problem is that I installed proxmox VE 3.1 on a virtual machine (VBOX), and when I try to upload an ISO image the bar that shows me the percentage of the upload process returns to to 0% when it is at 60%, and then this repeats and repeats. I couldn't upload complete ISO image

Thanks
↧

Dell Openmanage with Proxmox 3.1

December 11, 2013, 4:38 pm
$
0
0
hi,

I followed the instructions to install the latest Openmanage for Debian. In the past this has worked ok but now I'm seeing in the messages log -

instsvcdrv: /etc/init.d//dsm_sa_ipmi start command failed with status 1

I think something called OpenIPMI needs to be installed which it is but still not starting. :(

Im running Proxmox 3.1. Anyone got OM working with this version of Proxmox?

thanks

matt
↧
Search

can`t use snapshot function

December 11, 2013, 10:33 pm
↧

Error backup vzdump STOP with Windows Server 2008R2

December 11, 2013, 11:48 pm
$
0
0
Hi

I have a problem with backups in STOP mode on Proxmox 2.3 server's.

My virtual machines do not stop at the time of the backup. Virtual machines are Windows Server 2008 R2.

Here is the error:

Quote:
[Dec 08 22:28:19 ERROR: Backup of VM 107 failed - command 'qm shutdown 107 --skiplock --keepActive --timeout 600' failed: exit code 255
Do you have any idea? Could someone help me please? What should I do for my Windows virtual machine stops?

thank you

Kevin
↧
↧

Backup problem... (PVE 2.1)

December 12, 2013, 12:46 am
$
0
0
Hi have an host that failed backup on a NAS (via NFS).

This is the message:

ERROR: can't aquire lock '/var/run/vzdump.lock' - got timeout

How can I look into it and find how to solve?
Thanks...
↧

Error No Space Left (Tool.pm)

December 12, 2013, 2:06 am
$
0
0
Hi, when i am trying to migrate my container, i found this error

starting worker failed: mkdir /var/log/pve/tasks/C: No space left on device at /usr/share/perl5/PVE/Tools.pm line 788 (500)

what should I do ?
↧

[Display] Show Proxmox and KVM IP's

December 12, 2013, 5:13 am
$
0
0
Hi,
My name is daniel and for my thesis is need your help.

I'm creating a mobile server that goes with our team to presentations. We would put this server into the Lan an Proxmox and his virtual machines get a IP from the DHCP server.
Now my Problem is, without is Display, nobody know this IP.

Now... showing des Proxmox IP is no Problem with LCD4Linux and other tools, but whats with the kvm machines? how i get his given ip from the host machine to give it to the display?

Sorry my english is not soooo good, but i hope you can help me to solve this problem. :)

Thanks
Daniel
↧
Viewing all 171704 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>