Clik here to view.
error: invalid arch-independent elf magic
Hello, At first I wanted to update the capacity configuration to reduce the local space and increase the local-lvm space. I use the command Code: lvreduce -L -10G /dev/mapper/pve-root After rebooting,...
View Articlehow to best benchmark SSDs?
Hi, I want to rebuild my pool and I will most likely use 6x Intel S3710 200GB as a striped mirror for the new VM pool. Right now I'm using 4x S3710 200GB + 1x S3700 200GB as a raidz and got a write...
View ArticleClik here to view.
Join information greyed out in 6.4.8 cluster
Hi Everyone, My cluster doesn't allow me to look at join information... I've recently lost a node (RAID controller failure) so I reinstalled using HBA, but I can't join the "new" node to the cluster?...
View ArticleBackup 'zstd: /*stdout*\: Input/output error'
In one of my server I frequently run into failed backups on a CIFS location and since this is the case for several month now I thought I start a new thread, also there already is this old thread from...
View ArticleHuge increase in I/O load on NVMe disks (at equal VM load) after upgrade from...
Hi! Last night we upgraded our production 9-nodes cluster from PVE 5.4 to PVE 6.4 and from Ceph 12 to 14 and then to 15 (Octopus), following the official tutorials. Everything went smoothly and all...
View ArticleDocker doesn't work after upgrade to Debian Bullseye - cgroup problem
I upgraded Proxmox to version 7 and on this server I have a container running Debian which hosts docker containers. Before the upgrade, the container was working fine. The server was running Proxmox 6...
View ArticleHardware Support
We have been grappling with getting our Hyperconverged Ceph cluster moved over from 10Gb copper to 25Gb optical fiber for months now. We have been entirely unsuccessfully to this point. Is there a...
View ArticleUnexpected Shutdown
Hey Everyone, I have a proxmox server running for about 2 years now. Recently the server has been shutting down and not rebooting. Usually if power fails the server reboot and functions properly. In...
View ArticleUpgrading to PVE 7 with less than 4GB of free space?
Hey Everyone, So when I initially installed my proxmox I apparently made the root disk a little small at around 6GB. I'm looking to upgrade it to 7 and I see that it says to have a min of 4GB of free...
View ArticleZFS unable to import on boot/unable to add VD on empty zfs pool...
Hi there... I've installed PM on my testlab: - 4-core xeon - 32GB DDR3 ECC - 2x600GB SAS (hardware PCI-E RAID1) - boot drive with PM itself + VM boot VD's... - 6x1TB 2,5" mixed SATA drives (IT mode via...
View ArticleProxmox switching off power of other VM while performing backup
Hello, I run Proxmox PVE 6.4-12 with 3 VM - Ubuntu Server and 2 VM of Windows Server 2019 (VM103 and VM104). I have scheduled a backup of all VM (stop mode) and it runs fine. However, sometimes happens...
View ArticleClik here to view.
buster/updates InRelease' changed its 'Suite' value from 'stable' to 'oldstable'
Can someone help to fix that? Thank you.
View ArticleIncrease the FPS of the console
I'm looking for the best configuration to maximize graphics performance in the console. For now the best performance increase I have obtained by increasing the amount of memory dedicated to the...
View Articlestorage migration failed: block job (mirror) error
Hello, We are getting a lot of these errors when we try to move vm discs between nodes or from NFS storage to local storage: Logical volume "vm-305-disk-0" successfully removed TASK ERROR: storage...
View ArticleQuadro P400 Passthrough
Hi, I know there are a lot of posts about (not working) PCie passthrough, and I am pretty sure I have read all of them. However, I do not seem to get it to work on my Quadro P400. System spec: Asus...
View Articleproxmox 6.2 sdn beta test
Code: Updated proxmox 6.4: Minimum packages version (available in no-subscription-repo) libpve-network-perl_0.5-2 ifupdown2_3.0.0-1+pve3 pve-manager_6.4-6 Changelog beta v2: - reworked the vnet design...
View Articleproxmox 7 / linux 5.11.22 issue with LSI 2008 controllers?
Hi, I believe I may have found an issue with Proxmox 7, though more specifically how some LSI cards are handled by the mpt3sas module present in kernels from version 5.11.20 and onward. Hardware:...
View ArticleLXC running docker fails to start after upgrade from 6.4 to 7.0
I was doing a test upgrade today on on server, followed the upgrade guide. I had a number of turnkey core 16.0 LXC's running docker, and after upgrade these failed to start docker. I eventually chased...
View ArticleMails kommen nicht durch Fehler 550 5.7.1
Hallo Zusammen Habe mir auch mal den Mail Gateway installiert. Sieht super aus das ganze. Die Installation und Einstellungen ist ohne Probleme durchgelaufen. Mail Gateway 7.0-6 (alle Updates gemacht)...
View ArticleBackup von RBD-Snapshots
Hallo, gibt es eine Möglichkeit rbd snapshots einer VM auf dem pvb-server mitzusichern? Wenn ja - wie genau? Danke & Gruß!
View Article