2 node cluster using iscsi multipath to Dell ME5012 4 port 10Gig for iscsi...
Hi All, I am new to setting up iscsi multipath but did manage to get everything working as far as I can tell. I am getting about 2400Mbps read using fio on the VMs. the ME5 is configured for RAID10...
View ArticleHP DL380 G8 HBA Controller zum ZFS booten
Hallo, ich habe noch einen DL380 G8 und möchte den auf ZFS umstellen. Nun ist der mitgelieferte P420 für ZFS nicht geeignet. Daher suche ich einen HBA Controller von dem Proxmox auch booten kann. Lt....
View ArticleProxmox Cluster: SSL Error and Host Verification Failed
I created the cluster via the webUI on my pve node, then joined the r330 one. After joining, the webUI for the r330 cannot be reached, and if i try to look into it from the pve webui, i see a...
View ArticleThe network cards do not reach the expected speed.
In our PVE cluster, we use 100G network cards. Three servers have Intel cards, while the others have Broadcom 100G cards. The Proxmox Backup Server has the same hardware and 100G Intel cards. When I...
View Articlee1000 driver hang
In the past week we are seeing random e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang failuresacross all our nodes, even different hardware hosts. Must do a reset of the host. There are lots of...
View ArticleProblems with GPU Passthrough since 8.2
Hi, I have had a problem with GPU passthrough since updating to 8.2. The VM to which I have passed the GPU no longer starts and has the following error message: Code: kvm: -device...
View ArticleZFS mit 2 M.2NVME SSD und 2 SATA SSD optimal konfigurieren
Moin, wie kann man aus 2 x 2 M.2NVME SSD und 2 x SATA SSD die beste Leistung raus bekommen? Wenn ich diese 4 Laufwerke in ein ZFS konfiguriere, wie wirkt sich das auf die Leistung aus oder sollte man...
View Articlefinding live eth ports during installation
I had a question about installing ProxMox. I recently installed 8.3 on a Dell R620, that has four ethernet ports, two 10G SPF and two 10G RJ45. Only the first one is connected. For some reason, it...
View ArticleProxmox Installation 8.3.1 auf älteren LGA 1366 Boards funktioniert nicht mehr??
Hallo Boardies, ich habe extreme Probleme Proxmox 8.3.1 auf meine alten Server zu installieren. Diese beiden Server (einmal Intel 5520HC und einmal Supermicro x8dtl-if) wurden vor 2 Jahren auf Proxmox...
View ArticleClik here to view.
A Note: Deleted PBS Storage on PVE, Pruned all Backups from PBS, Re-Added PBS...
Hello, Just a note for anyone else to help them avoid a blood pressure spike. I previously had my PVE host configured to backup to a @tuxis free PBS instance. After a bit of testing with some throwaway...
View ArticleiSCSI Disk as LXC Mount Point does not reconnect after outage
Hello all. I've been tinkering with Proxmox for a few months now, and most of the time I can find solutions to my config 'panics' on these forums (thanks all!), however there is an issue I'm having...
View Articlepve upgrade failed with error
today i tried to upgrade the three node cluster, one server upgrade / update is perfect, but on the second server the update failed with the following error: - Starting system upgrade: apt-get...
View Articlesnmpd[2644]: systemstats_linux: unexpected header length in /proc/net/snmp....
I know there is a bug at this time with snmp but I was wondering if there was a workaround or a way to patch this temporarly in order to avoid floodind syslog ?...
View Articlemigrate VMs in cluster on planned reboot only
Hi, I want to use HA safely in a proxmox cluster with no shared storage (only zfs replication). The behaviour I'd like for some VMs is this: - for planned node reboots (`reboot` command on shell or the...
View ArticleSSD Migration Options
I've read through all the related posts I can find, and haven't been able to identify a clear path to escape my situation safely. I have an SSD (1.86 TB) that is dying. My whole proxmox install is on...
View ArticleProxmox installation interfaces get no IP
Hello everyone, I am currently installing a proxmox system on some new hardware. For reference, I am using the following CPU and Motherboard: - AMD EPYC 7443P - Supermicro H12SSL-NT After the...
View ArticleBroadcom NICs down after PVE 8.2 (Kernel 6.8)
We had some issues with some broadcom nics going down after update to 6.8 Workaround: NICs go up if you do a service networking restart FIX: Update Broadcom Firmware to latest firmware and blacklist...
View Articlesmartctl version 7.4
Is there a possibility that smartctl will be updated to v7.4? Due to the fact that used Seagate hard disks are sold as new, it would be useful if the current version of smartctl is also available on...
View ArticleMigrated ESXi Windows 2012 server fails to start
I was able to migrate a Windows 2012 R2 server from my ESXi server into Proxmox but the OS is not able to boot. It boots to the Troubleshoot screen but it is not able to fix. Any suggestions on how to...
View ArticleHow to join a Proxmox cluster to an Active Directory Domain
This tutorial will walk through the steps necessary to join your Proxmox server to Microsoft Active Directory on a Windows 2019 Server. You will be able to sync your users and groups into the Proxmox...
View Article