PVE firewall with NAT not working
Hello, I set fresh Proxmox on dedicated server with Hetzner. I have only one IPv4 and IPv6 subnet. Everything is working fine means: - 3 interfaces: eno1, vmbr0 routed and vmbr1 with NAT. - I can reach...
View ArticleTask - Start all VM's and Containers
Hey, my server has been up for about 24 hours, I have not begun to configure anything yet, however, I notice that every once in a while the task of starting all VMSs and Containers runs. Does it seem...
View ArticleQEMU xhci driver for Windows 7
Per title. I have an old printer that needs an old windows host to configure its WIFI. so I figured no sweat, I'll just fire up a windows 7 vm, right? Well, PVE8 seems to either preset the host USB or...
View ArticleProxmox and OPNsense - Network speed issue
Hi everybody, After some research on the web, I think there's no solution with OPNsense but I ask you because perhaps I've missed something. My config : Proxmox 7 (Debian 11) OPNsense 21.7 Virtio...
View ArticleVLAN's across hosts in a cluster
Hi All, I've been banging my head against a brick wall with this one for a while. I have a homelab with a 2 server cluster. My router (OPNSense) is running on the cluster and is configured to route:...
View ArticleMessed up with extending LVM with software RAID 5 config
Hi guys I started to do something but fear to have messed it up: I run a Dell server with 2x 600 GB SSD in a hardware raid 1 config and 3x 12 TB HDD in a software raid 5 config. The SSDs carry the...
View ArticleFreeze während snapshots
Hallo Folks ich habe eine Single node mit aktuellsten Proxmox. Darauf laufen 8 virtuelle Windows Maschinen. Teils neu angelegt und teils importiert aus einem ESXi Cluster via webif. Hin und wieder...
View ArticleCan't load RADOS for module PVE::RADOS, GUI and CLI tools fail
Hello, my proxmox server has been running happily for a few months since last reboot. I tried to run a new container and got this message: Code: Can't load...
View ArticleIncorrect information is appearing in the "allocation" tab
I installed the PDM.. but In the "allocation" section It shows that I have: CPU Cores assigned 197 running / 96 physical (6 total configured) Memory assigned 272.865 GiB running / 439.907 GiB physical...
View ArticleProxmox kernel 6.x intermittent vm freeze
Hello, We have an issue since linux kernel 6.x. We have a vm with GPU passthroutgh. Everything works great with kernel 5.15.131-2-pve. However with kernel 6.5.13-6-pve 6.8.12-4-pve we encounter strange...
View ArticleWelche SSD??
Eine Frage an die Technikgenies. Ich habe mir einen HP ProDesk 600 G5 i5 9500T gekauft. Welche SSD (Datacenter Qualität) wäre passend und nicht overdressed?
View ArticleClik here to view.
PVE cpu Ressourcen Windows11 vs. WindowsServer2019
Moin zusammen, ich beobachte, dass die Windows11 Pro Gäste viel mehr CPU Last erzeugen. Anbei ein screenshot eines PVE Nodes mit 3xWin11, 3xSRV19 und 1xDC (UCS). Auf den Windows 11 Gästen ist nicht...
View ArticleClik here to view.
Proxmox host traffic routing issue
I have an issue with my current network setup that for some reason is preventing the Proxmox host traffic to be routed back correctly to a Linux bridge. I have OPNsense virtualized and behind it a...
View ArticleI need help with my network.
Hello, I need some help setting up my network. My instances are not getting an internet connection, and I'm not sure what I have configured wrong. It would be nice if someone could help. Code: source...
View Articlebiggest disk on your vm
Hello, May I know what is the biggest disk you ever assigned to your VM (Win/Linux) before and any issue?
View ArticleClik here to view.
High retransmisions between VMs but no retransmision between pve node
Hello everyone, We have been doing some network testing on our VMs because of a recent network change we have made. While doing this test we have noticed a high retransmission rate on our VMs, between...
View ArticleRouting additional IPs through tunnel?
Hello everyone, First of all, let me say that I’ve tried searching (I’ve searched extensively on the forum and the internet for weeks, but I haven’t been able to find a working solution). Here’s my...
View ArticleLXC Restore: Which mountpoints will get deleted?
Hi, II'd like to restore the following LXC: Code: mp0: wdreddata:vm-129-disk-0,mp=/root/app/persistant-data/immich/uploads,backup=1,mountoptions=noatime,size=88G mp1:...
View Articletargetcli on zfs lockup?
Hi, i'm abusing my PBS installation for some archival requirement. Installed targetcli-fb and assigned a zvol through it to PVE. Using this target directly from windows instead through PVE was working...
View ArticleHome-Lab Idee der Umsetzung gefragt
Hallo zusammen, Ich beschäftige mich schon etwas länger mit Proxmox und bin angetan von der Möglichkeit Container und VMs via Knopfdruck zu sichern und wiederherzustellen. Zusätzlich mag ich es eine...
View Article