Proxmox on internal ip - VNC
Hello, We want to run our proxmox on internal IP's for security but we want our clients to access VNC ONLY! Is this possible? i did see something about VNC Proxy but not much information about it, i...
View ArticleClik here to view.
Need help,HP DL380G6 install pve 8.3 problem。
Hello everyone, I have an old server.HP DL380G6 ， When I installed pve at the beginning, when I selected GUI, the monitor prompted that the display was out of range. Then according to the solution to...
View ArticleFabU: can I use Ceph in a _very_ small cluster?
Ceph is great, but it needs some resources above the theoretical minimum to work reliably. My assumptions for the following text: you want to use Ceph because... why not? you want to use High...
View ArticleWear levels on SSD's increasing daily.
Anyone else seeing this amount of wear on ssd's? I have been running this node for about 2 years, with the drives that are in it. I was watching to see if they would withstand being used this way,...
View ArticleTutorial: Unprivileged LXCs - Mount CIFS shares
Since unprivileged LXCs are not allowed to mount CIFS shares and priviliged LXCs are considered unsafe (for a reason) I was scraping my head around how to still have my NAS shares available in my LXCs,...
View ArticleCluster Issues
Hi all, I am running a 2-node cluster both on 8.3.2, After having a power outage, one of my nodes (Node 2) gets the "unable to resolve name ZYX" and Node 1 starts hitting the logs with "Totem...
View ArticleEVPN+VPLS with multi exit nodes : firewall drop packet with asymetric routing
Hello, I've been trying for weeks to set up a 3-node cluster with EVPN+VXLAN between the nodes, and a BGP controller that announces unicast prefixes to my network. Each node has its own BGP controller...
View ArticleHow to replace the NBP (Network Boot Program) of the Q35 EFI VM to iPXE ?
Hi, I am experimenting with netbooting my VM and I would like to use iPXE. The intel 440 VM has ipxe pre-installed by the Q35 has some other PXE client as the boot rom. I would like to put my own...
View ArticleGPU passthrough to Container (LXC)
loving all things proxmox thus far have created my 1st of many containers (ubuntu 22.04) and have 2 x NVIDIA 2080 GPUs on my host, which i would like to use in the contanier what is the best way to do...
View ArticleFabU: Can I use ZFS RaidZ for my VMs?
Assumption: you use at least four identical devices for that. Mirrors, RaidZ, RaidZ2 are possible - theoretically. Technically correct answer: yes, it works. But the right answers is: no, do not do...
View ArticleHelp with setting bond primary slave
PVE 8.3.2 I created a bond0 interface with 3 NICS (2x1Gpbs, 1x2.5Gbps). I would like to have the faster NIC (enp6s0) as primary. When I disconnect its cable, one of the two 1Gbps slaves becomes active....
View ArticleThunderbolt stopped working after recent update?
solo10gsfp+ was working fine until recent update. Output from dmesg [ 1424.374480] thunderbolt 0-2: new device found, vendor=0x8 device=0x36 [ 1424.374486] thunderbolt 0-2: Sonnet Technologies, Inc...
View ArticleClik here to view.
Proxmox install scripts for ipxe-buildweb, rom-o-matic and ipxe-simple (ipxe...
Hi, As I experiment with iPXE, an open source network bootloader firmware, I have to rebuild it with HTTPS support that is missing from the official releases. https://boot.ipxe.org/ These scripts are...
View ArticleCannot boot 6.2 USB installer on Dell T5810
I have been trying to create an installer USB stick for Proxmox 6.2 for my Dell Precision T5810. It can boot my Windows 10 USB installer but it cannot find a boot device when I create a USB Proxmox...
View ArticleUsing USB 3.0 HDD enclosure with an OMV Proxmox VM
Hello, hoping this is an ok place to post my question. I have an Intel NUC running Proxmox 8.1.5. I have a Teramaster 4 bay USB 3.0 enclosure connected with 4 hard drives attached. I would like to pass...
View ArticleI want to disable all firewalls, I want NO host networking in the way at all
Is there a way to do this? Proxmox seems to be the most ass-backward virtualization ever with Proxmox getting in the way of everything I could ever want to do. If you have a task, there's a way Proxmox...
View ArticleProxmox 8 installer freezes at boot
I'm trying to install Proxmox 8 on my server, and the installer freezes when booting like on beta version. I tried graphical and console installation and same issue. HW Supermicro X10DRL-i Intel C612...
View ArticleVIRTIO SCSI vs VIRTIO SCSI single
Can anybody explain the big performance difference between VIRTIO SCSI and VIRTIO SCSI single especially when using iotread=0 and iothread=1? Code: read : io=1637.7MB, bw=39596KB/s, iops=6491, runt=...
View ArticleHard-drive passthrough
Hey everyone I'm trying to get the smart testing working for my hard drives on my truenas vm after some research I found out I had to pass through the controllers for the hard drives to make it work...
View ArticleClik here to view.
Intel Arc B580
Hello! I have followed the following guide https://www.reddit.com/r/homelab/comments/1hggz6l/an_updated_newbies_guide_to_setting_up_a_proxmox/ to try and use my Arc B580 to be used in vm's and LXC's...
View Article