Best Way ZFS another server in cluster
Hello, what is the best way to use the local zfs storage within another pve in same cluster for vm disks? Thank you!
View ArticleNetwork interfaces down on reboot
Hello there, I just installed Proxmox VE 8.2.2 on a new Supermicro server hardware with a Broadcom CM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet. Installation works like a charm and the Proxmox...
View ArticleEx-cluster node has frequent writes to pve-cluster and pve-replication
Hi, Running 8.0.4 on a new install. This was joined to a cluster, had VMs migrated over onto it, and was then removed from that cluster by following "Separate a Node Without Reinstalling". So far so...
View Articlecloning a VM with all snapshots
I have a VM that has 13 snapshots in my qcow2 file. While unintentional, I want to conduct a few performance tests without potential consequences to the production VM. For the tests I want all of the...
View ArticleLXC with /dev/ppp
Hi all, I would like to know how should I setup the following PVE Host instructions to be automatically fired/ran at PVE Host boot time? Code: chown 100000:100000 /dev/ppp What's the best practice way...
View ArticleHow to make VM ignore missing luks drives?
Hi. I have a luks-encrypted external hard drive plugged into my host machine. I use the host machine to open/decrypt and map the drive to /dev/mapper/my-luks on the host. Then I have that location...
View ArticleClik here to view.
Sudden Bulk stop of all VMs ?
Hi Every so often, all of a sudden, all guest VMs terminate. Can you please help me troubleshoot why that happens? I see Bulk start VMs and Containers in the log: dmesg has the proxmox host has normal...
View ArticleSMB / Fstab help
After a fully working proxmox server on a old pc I created a new proxmox server on better hardware. Most of the node is working, but I have two questions remaining. First Question: I mounted an...
View ArticleIssue with Space Allocation for Migrated VMs in LVM-thin
Hello! I have a problem with LVM-thin on my server. I have a cluster with two servers and recently migrated some VMs to the new server. However, the migrated VMs are occupying the entire allocated...
View ArticleJellyfin LXC with Nvidia GPU transcoding and network storage
Hola. I struggled through this one recently and figured I'd share. The Overview: We're looking for an unprivileged LXC to serve as a Jellyfin server. We want to use an Nvidia GPU (in this case a GTX...
View ArticleSegmentation fault
I have a problem when starting the machine, in the installation it was working and I was doing things with the machine, I turned it off and on a different day and the bridge port does not come out I am...
View ArticleTransfer WinSrv vms linked clone without setting a cluster
Hi, We are replacing a pve 7.x server with a new one with pve 8.x. For this, we want to transfer all the windows vms to the new server without generating a cluster, since the currently operational pve...
View ArticlePVE 8.22 / Kernel 6.8 and NVidia vGPU
I thought I'd make this post since I see other ones made, and have commented on them myself, about getting NVidia vgpu working under PVE 8.2.2 and kernel 6.8 Basically read through this guide:...
View ArticleIt is safe to run multiple re-verification jobs at on same PBS datastore?
We have verification on all new snapshots, but we want to re-verify backups more often. The problem is that verification job is doing it one by one, can we do it in parallel by multiply jobs on the...
View ArticleUsing proxmox Ceph as a source cluster for external storage cluster?
Hi, I was planning to use my proxmox ceph cluster as source cluster for an external storage cluster, with my k8s cluster as a consumer cluster, but when i run the scripts suggested on...
View ArticleRestore large VM wont work - timeout
Hey, we are running into issues while we trying to restore an large (1,5TB) vms. We can reproduce this behavior. Small VMs works fine. Problem exits for different VMs / Backups. The Snapshots we are...
View ArticleCronjobs auf Debian VM
Hallo, ich habe ein eigenartiges Verhalten von Cronjobs die auf einer Debian VM laufen festgestellt. Ich habe keine Erklärung und bitte um Hilfe. Der Cronjob soll alle 10 Minuten laufen und ein Python...
View ArticleVM verliert USB Verbindung
Hallo, ich habe am Hostsystem (Minisforum HM90) eine Eaton USV via USB angebunden. Diese wird nach Eingabe von "lsusb" auf der Konsole auch wunderbar angezeigt. Wenn die USV an eine VM mit aktuellem...
View ArticleUpgrading Containers to u24.04
TLDR it failed to boot. Then I upgraded proxmox for some other reason and when it rebooted my upgraded container sprang into life. So the questions is - is this something to do with the kernel being...
View ArticleI can't use clonezilla to clone my virtual machine
What's up i am beginner whith proxmox, i have a clonezilla image, and when i boot with clonezilla, first show the menu correctly but after the screen looks like a old tv and i wait a minuts but nothing...
View Article