Problem installing Mellanox ConnectX-3 CX311A 10g NIC
Good afternno all... I have been trying to install and configure a Mellanox ConnectX-3 CX311A 10bge nic on a Proxmox v8.2.4 server running on an HP Elite 800 G4. The Proxmox GUI does not show the card...
View ArticleClik here to view.
Single File Restore fails
Hi, got this after upgrading to newest version from PVE 7.1 to PVE 7.2-4 and PBS 2.1 to 2.2-1. I thought I'd share it (maybe it's a known issue? proxmox-file-restore failed: Error: cannot run...
View ArticleEnabling IOMMU on AMD/Asus Desktop
Hi, I have the following system set up: - Asus M11BB System - F2A55-M Motherboard - AMD A8-6500 APU - 32 GB DRAM - Two SATA 256GB SSDs on the motherboard SATA connection (local disks for Proxmox &...
View Articleceph cluster rebuild - Import bluestore OSDs from old cluster (bad fsid) -...
ceph version 18.2.2 (e9fe820e7fffd1b7cde143a9f77653b73fcec748) reef (stable) Hello everyone, please we need your help to import the bluestore OSDs to the new cluster, because after trying to import, we...
View ArticleClik here to view.
My VM doesn't boot anymore. The VM disk is on a ZFS. SMART passed. Any ideas?
Hello there! Thank you for reading my message. I have six 1TB HDD and I created a raidz2 disk with all of them, which resulted in an usable capacity of 3.87TB. They've been working fine for months but...
View ArticleColocation Networking Need Help Before Shipping
P Allocation: 104.XXX.XXX.140/30 Usable IP: 104.XXX.XXX.142 Gateway: 104.XXX.XXX.141 Netmask: 255.255.255.252 I'm about to ship out a server and this information was handed to me to setup networking. I...
View ArticleUnable to connect through PIA container
Hi, hope someone can help. I setup a PIA server in a container on Debian 12. I've configured the container to start and connect to to PIA via openvpn at boot. That is working fine and the container...
View ArticleNo previous backup found, cannot do incremental backup
Hi First of all, thanks for that awesome proxmox backup server. I currently do my first steps with it and got the most things working properly. What I noticed is, that the first backup always went...
View ArticlePlease explain LVM Thin making your existing Proxmox drive a mirror
Hi I hope I won't raise anyone's ire because I have read many pages over the last week on LVM & LVM Thin mirroring . However, all the solutions seem to refer to installing from scratch or assume...
View ArticleClik here to view.
SSD lässt sich nicht einbinden und formatieren
Hallo, Ich habe meine SSD aus Proxmoxx gelöscht und möchte dieser wieder einbinden und formatieren. Aber das formatieren klappt nicht. Es kommt folgende Fehlermeldung: error wiping '/dev/sda': wipefs:...
View ArticleMax number of subfolders reached in .chunks/ folder
Hey all, I'm trying to use an old Dell VNXE Storage as a sync target for cold storage out of site backups copy. The datastore creation fails with an IO Output error. As it turns out, it seems I cannot...
View ArticlePutty (SSH) Fehlermeldung: Access denied
Hallo, leider bekomme ich seit bei allen Linux Container keine Verbindung via Putty hin. Alles Linux ubuntu 22 server Container. Ich kann meinen Benutzer "root" und das Passwort eingeben. Danach kommt...
View ArticleLXC Upgrade
Hello all, I've been upgrading my LXC containers in proxmox on a weekly basis... but recently the containers are no longer receiving updates due to being a bit older. Question is if its better to do a...
View ArticleZFS ashift on NVME SSD
Hi All, What should be correct ashift setting (9 or 12) on zfs pool with such disks: Code: Disk /dev/nvme1n1: 1.46 TiB, 1600319913984 bytes, 3125624832 sectors Disk model: Micron_7400_MTFDKBG1T9TDZ...
View ArticleClik here to view.
Renaming a node for visual/organizational reasons
I found this https://pve.proxmox.com/wiki/Renaming_a_PVE_node, but I would like to rename our nodes to different names for visual/organizational reasons, like tags for VM/LXC. Our cluster looks...
View ArticleTwo separated full meshs for cluster / corosync in a 3-node-cluster
Hello Guys! I'm setting up our new cluster at the moment. The cluster network is a 25 GBit Full-Mesh configuration between the nodes (up and running! ;-) ) To follow the KISS principle and reduce the...
View ArticleClik here to view.
WinServer 2022 poor performance on Proxmox 8.1.3
Hi, I use Proxmox 8.1.3 and installed Debain 12 and WinServer2022 as guest. There is no problem on Debain but Windows Server is very slow. We use SAP B1 in it and using SAP B1 is terribly slow. I check...
View ArticleBest Practices for Deploying Intel Servers with Proxmox
Hi everyone, I'm planning to deploy a new set of Intel servers and I want to integrate them with Proxmox for virtualization. I'm looking for advice on the best practices for this setup. Here are a few...
View ArticleWelcher Raid Controller ist mit Proxmox kompatibel
Hallo zusammen, ich finde im Inet leider nur recht schwammige Antworten, welche Raid Controller mit der aktuellen Proxmox-Version bzw. mit dem Kernel 6.8 kompatibel sind. Mir geht´s vor allem um...
View ArticleKein RAID für storage, jedoch 2 pve nodes
Moin zusammen, Ich bin gerade dabei mir einen zweiten pve Node zu besorgen um dann zu replizieren. Für die storage VM möchte ich eine! 18TB HDD mit ZFS mounten. Das gleiche auf dem Node 2. Ich möchte...
View Article