Need help with replacing crashed disk in zpool
hi all, I've searched around and read pretty much every thread about zpool related issues, but alas... the pool in question is status faulted, one of the disks is unavailable (and physically removed to...
View ArticleClik here to view.
Orphaned fleece drives filled up my drive - now it's too full to boot.
Hiya! I had to force stop one of my backups, which I believe resulted in orphaned fleece drives. This is what it looked like: I couldn't delete them (it told me to delete from the hardware tab...
View ArticleI/O Issue during backup
Hello all, Recently I started having issue during mainly backups, proxmox hangs and the management page is not available anymore, backup never completes and everything basically stops. Hard reboot is...
View Articlehttps://www.facebook.com/JavaBurnWeightLossCoffeeOfficial/
https://www.facebook.com/JavaBurnWeightLossCoffeeOfficial/
View Article[iperf3 speed] Same Node vs 2 Nodes (Found a Bug)
I just stumbled over something very weird with LXC Containers, but i bet it happens with VM's either: i have 2 Identical Nodes in a Cluster: - both are connected over 2x25G in LACP (NIC: Intel E810) -...
View ArticleVPS won't start after migration. /dev/sda1 does not exist
I have migrated about 10 servers from one proxmox server to another, all are working fine except 2.I did the restoration using the "Live Restore" option that it offers when coming from a proxmox backup...
View ArticleBackup of a FreeBSD+ZFS VM fails verification
Hi community and PBS support. I am experiencing a strange issue with PBS, I am obviously doing something wrong but I can't figure out what. PVE Details: Code: Cluster: No, single host Version:...
View ArticleHelp Needed: Networking Issue with Linux Bridges on Cluster, hard down.
Hi All, I'm seeking assistance with a odd networking issue on version 8.2 (non-production repos). We are currently operating on kernel 6.5, despite the availability of kernel 8.6, due to specific...
View ArticleCannot log in to the web console: Connection closed (Code: 1006)
On one of my nodes I cannot log in to the console via the web interface. I get the message: Connection closed (Code: 1006) /bin/login: 3: Syntax error: "(" unexpected. I already tried apt install...
View ArticleIntermittend "599 Too many redirections" on VM creation through API
Hi, we are running a 2 node cluster (with a qdevice to keep quorum) for our internal development environment. Both nodes are running proxmox 7.4-16, with each node having local RAID 5 SSD storage. VM's...
View ArticleZFS Pool, nicht mehr automatisch geladen?
Hallo, ich habe gestern die Updates eingespielt Kernel 6.8.4 und ZFS Updates. Auch mit dem alten Kernel jetzt das Problem. Seit dem wird EIN ZFSpool nicht mehr automatisch geladen und damit meine VM's...
View ArticleHard disk is no longer recognized in the OS after Proxmox update
Hi! I am currently assembling a new server, which runs after the initial installation of Proxmox 8.1.5 and recognizes everything (including the SATA hard drive (sda)), but can no longer be found after...
View Articleqm Parameter --migrate_downtime
Hallo, vom Proxmox Support wurde ich auf den Parameter --migrate_downtime hingewiesen, mit dem laut Manpage die "maximum tolerated downtime (in seconds)" eingestellt werden kann. Doch wenn ich diesen...
View ArticleMigrate PVE to a new drive
I'm getting a new drive and want to use it to run PVE instead of the current drive. My question is, if I install PVE on this new drive and boot from it, will the storages (for VM disk images and stuff)...
View ArticleClik here to view.
Backup Sync Job
Hello, I have two Proxmox Backup Servers in play. The first is where all guests are backed up with a retention of five. The second PBS I have configured to sync from the first one. I noticed it only...
View ArticleDatacenter / Storage - create ISO image on ZFS drive
So I've 3* 500GB SSD configured as a logical volume via my disk controller - so proxmox only see's 1.5TB SSD storage as local /local-lvm I also have a single Spinny_disk (old 1TB drive I had in a...
View ArticleIssue connecting to CIFS share
Having some issues creating a CIFS share to use as a backup location for Proxmox. I'm relatively new to all of this, but trying to learn as much as I can. I have a SSD attached to my router which I use...
View ArticleProxmox web gui stopped working
I have checked proxy and daemon services both are running fine no errors. I can ssh into it but cannot web gui. Please let me know what commands to run and I will post the output here. Code:...
View Article[Guide] Jellyfin + remote network shares + HW transcoding with Intel's QSV +...
Took me two days to get it working but it was well worth the effort. Thought I'd share as I see this question asked often. Set up the LXC • Use Debian 12, update and upgrade, install curl: Bash: apt...
View ArticlePVE 8.2 / Kernel 6.8.4-2 does not boot - cannot find root device
With the new kernel in 8.2 I am facing the problem that initial waiting for the root device times out and boots into a busybox shell. The error messages I see are: Timed out for waiting the udev queue...
View Article