Zeitsynchronisation nach Hipernate bei Windows
Hallo zusammen, ab und zu muss ich einige Windows Maschinen pausieren. ist die Pause größer als 48 h weigert sich Windows in den Standardeinstellung die Zeit über NTP zu synchen. Gibt es eine...
View ArticleHow to check if my iGPU is passed through correctly.
UHD 770 iGPU on Core i5-14500, Debian 12 VM, UEFI q35 Hey, I have followed this guide: How to pass through Intel iGPU to Proxmox virtual machine – Peanut Tech (peanut-tech.com) After disabling ACPI it...
View ArticleIntel Nuc 13 Pro Thunderbolt Ring Network Ceph Cluster
Hello, I do have a problem with my Proxmox intel Nuc Cluster. It contains 3 Intel Nuc 13 Pro and uses its 2 Thunderbolt Ports to form a ring networt for ceph communication. Proxmox/Ceph – Full Mesh HCI...
View ArticleSOLVED: HA Cluster shuts down VM's rather than migrating them when rebooting...
I figured it out in case anyone ever stumbles across this.... Datacenter --> Options --> HA Settings Change to shutdown_policy=migrate I'm at a loss as I have another cluster set up the same way...
View ArticleHardware RAID controller with ZFS again
Hello I have MCloud server and all of the 8 nodes with Hardware controllers, yesterday, I tried to install RAID 0 with ZFS in the top of RAID1 with 4TB micron 4300 , the performance was crazy and this...
View ArticlePVE working fine but no local console video output
PVE 8.0.3 installed and is working successfully. Host is a Dell Optiplex Tower Plus 7010, with Intel i7-13700 CPU. There is no discrete graphics, it's using the IGPU only. This machine has 3 full size...
View ArticleAfter update to proxmox-kernel-6.5.13-5-pve-signed:amd64 (6.5.13-5,...
From /var/log/apt/history.log: Start-Date: 2024-04-10 16:56:56 Commandline: apt upgrade Install: proxmox-kernel-6.5.13-5-pve-signed:amd64 (6.5.13-5, automatic) Upgrade: lxcfs:amd64 (5.0.3-pve4,...
View Articleqemu-kvm-extras / qemu-system-arm / raspberry pi under ProxMox2.x
I have a small army of Raspberry Pi devices for a project, and would like to be able to set up a "dev/compile" emulated Pi within proxmox, rather than having to do it on a slow machine, or setting up a...
View ArticleIntel Alder Lake i5-12500T/Intel UHD -- Cannot Successfully Pass iGPU to VM...
Hello, This appears to be essentially the same bug as reported here in 2019 (never assigned): https://bugzilla.proxmox.com/show_bug.cgi?id=2381 It was also discussed here:...
View Articlelxc container on zfs won't start after reboot of pve host
Hi@all after a reboot of my pve host the lxc container (ID 108) will not start. It was the first reboot of the host after I have created the container The disk of the container resides on a encrypted...
View ArticleBackups hang reliably when jumbo frames enabled on PBS VM
I currently have Proxmox Backup Server (current up to date with non-subscription repository) installed in a VM in Synology VMM which is running on a Synology DS1819+ (32 GB RAM, mix of HDDs and SSDs),...
View ArticleFresh Install, Unable to Connect to Proxmox Web UI
I installed Proxmox 8.1 on Supermicro x11sph-ctf MB, and am not able to get the system to play with my home network. My Gateway (verified) is 192.168.1.254. the DHCP range is 192.168.1.64 –...
View ArticleZerotier network bypassing firewall. Add network adapter in VM to proxmox...
Hello - this is my first time trying to use proxmox. I have a web development background, but extremely limited networking / IT knowledge. So this is all very new to me; I'm just saying that in case it...
View ArticleBAckup server / NFS share ?
Hello, I have two servers: 1xProxmox-ve and 1x TrueNAS. I would like to backup my VMs/Dockers in my TrueNAS server (NFS share). The main target is to do the backup on a different server. When selecting...
View ArticleIntel N100/iGPU Passthrough to VM and use with Docker
hey i hope this is the right subforum to post this it all started with the idea to get an Intel N100 mini pc to run plex or jellyin on it then i thought to myself, that it would be handy to make the...
View ArticleUpdate from 8.0.4 to 8.1.10 Broke all my VM's
So currently I have a 5 node cluster. 3 nodes are running ceph while the other two are running local storage currently. Ceph in the future. I went to update the nodes to the current version to get them...
View ArticleAMD iGPU passthrough won't work
Hello, I have a trigkey mini pc with the following specs: AMD Ryzen 7 5800H with Radeon graphics 24GB ram 512GB ssd my problem is i can't get the integrated GPU to passthrough. I have all the drivers...
View ArticleDR to Proxmox
Hello all, I have done a good google search and i cant find anything - is there any technology like Zerto or Nakivo or Veeam that can restore directly to Proxmox and mount the disks in case of DR...
View ArticleERROR
I have installed Proxmox 8.1.2 onto my NVME around 10 times today and at every finish, when I go to log in, I get an error. The error reads, "Login failed. Please try again." I have changed IP...
View Articlerules to access a VM through Firewall and via ZeroTier
I have a remote two node VE cluster, with a ZeroTier network with ZT nodes at the main router (ZT client) and also on hosts within the network, either in the VE cluster or just regular hosts on the...
View Article