Unable to save UEFI boot order
Hi! I'm having issues getting the boot order to stick using ovmf. I have a windows 10 VM, with passed through GPU and USB controller. This has worked without issues for over a year now. However I...
View ArticleAPI Internal Server Error [500], but requests complete?
Hi everyone, We're in need for some help here please. In short, some of the API requests return with 500, but complete anyway. We're on proxmox-ve: 6.2-1 There are no errors in /var/log/syslog in fact...
View ArticleClamAV Signatures from SecuriteInfo 90% Detection Rate!
I've seen many members here looking for a second anti-virus solution for pmg. How about getting better signatures for ClamAV instead? There is nothing wrong with ClamAV except for the detection rate,...
View ArticleClik here to view.
ZFS-2 Showing total usable storage at half of what it should be
Currently I have made a ZFS-2 made up of four 500GB SSD's. When I look at the size from the ZFS menu it shows the proper size. The problem is from the node menu and the disk select menu for creating...
View ArticleSolusVM-like IP blocks
Hi, I have a 16 core Opteron server at a data centre in the UK which i am currently in the process of rolling out. This server will be on a /29 range, allowing for 6x PUBLIC IPv4 addresses....
View ArticleUsing ZFS disk space to increase swap
Hello, I currently have 4 disks allocated to RAID 10 ZFS and require more swap space on my node and need to use some of that allocated ZFS disk. I have come across this...
View ArticleVM Harddrive Configuration
I recently installed Ubuntu 20.04 in a new VM on local-lvm on a single node Proxmox VE 6.4-8 set-up running on bare metal at a data-center. In the Proxmox "Create VM" wizard I chose 40GB for the size...
View ArticleCluster in "Standalone node - no cluster defined"
Hi, I have a Cluster that was fine and now is "Standalone node - no cluster defined" in the GUI. It seems to operate normal. I have some issues that might be related or not (HA seems to be affected). I...
View Articleceph update procedure
In another ceph thread: t.lamprecht said: I'd in general recommend a more cautious approach, restarting all those daemons at once can lead to issues, especially if there are unexpected problems with...
View ArticleHDD got renamed by itself?
Hello. I have some odd behaviour occuring with my node. I have dual 240GB drives for the OS and then dual 960GB drives for storage of VMS. Normally the naming was sda and sdb for the OS drives and sdc...
View ArticleNeed help setting up the disk array configuration
Background​ I'm installing Proxmox Virtual Environment on a Dell PowerEdge T630 with a Dell PowerEdge RAID Controller (PERC) H330 Hardware RAID controller adapter and eight 3TB 7.2k 3.5" SAS HDDs. I...
View ArticleClik here to view.
Lost quorum while all nodes are online
Hello there, last week I updated my PVE two node Cluster, but after rebooting since a while i ran into some problems: Both nodes currently are online, but keep complaning that there is no quorum. In...
View ArticleLXC no permission to use VAAPI
The LXC can no longer be access to the VAAPI When I change my PVE to use gvt-g. But the host works. on host vainfo outputs Code: error: can't connect to X server! libva info: VA-API version 1.10.0...
View ArticleVM can ping host but not gateway
Hi. New to proxmox and looking for some help. I have proxmox installed and I'm trying to set up a VM but I can't the VM to ping anything outside the host. Any and all help will be greatly appreciated.
View ArticleBtrfs on hardware based RAID 10 - is it okay?
I'm looking for advice, links to documentation, suggestions, etc., with regards to running Btrfs over hardware based RAID 10 on HP Proliant servers. The docs say this is fine with LVM (of course), but...
View ArticleClik here to view.
Quarantine with empty senders
I found that there are many emails with empty senders in the email tracking. Can I create a rule to quarantine all emails with empty senders, or reject emails with empty senders.
View ArticleFresh install - "cannot import rpool: no such pool available"
Hello, I'm doing a fresh install on 2x10TB drives. I've reinstalled the machine for three times, the result is the same: "cannot import rpool: no such pool available" Click to expand... Here's a full...
View ArticlePrune Simulator where to find ?
I don't seem to be able to find Prune Simulator in the PBS UI. Where is it ? Thx
View ArticleUnprivileged LXC + LAMP - nextcloudhub - onlyoffice ...
I currently use Proxmox 6.3.-4. One LXC is used for websites (debian 9 LAMP). I mainly run nextcloud 17 (wp, joomla, etc.) Now I would like to install the new LXC debian 10 and nextcloudhub +...
View ArticleHelp: Host backup cronjob email only error occur
I am using proxmox-backup-client to backup my PVE nodes. Everything works fine. Problem is when I put that in cronjob, even I am using > /dev/null, I am getting the output. Since I setup postfix on...
View Article