hubic in proxmox environment
Hi, I want to use hubic to backup "proxmox backup folder". At now, every time I reboot the server, I have to ssh into the server to manually start the service in the following way: dbus-launch...
View ArticleClik here to view.
fdisk -l do not show second hrd
I install Proxmox VE 4 and I install it on first HDD and my system has two HDD. when I run this command fdisk -l I see second HDD was partitioned by FreeBSD FS, I want use second HDD , for VM , because...
View ArticleHelp with Pci passthrough.
The hardware is a HP ProLiant ML310e Gen8 v2 Server with Intel Xeon 1231v2 with one intel nic attached to a pci-e slot. (i tried all ports) iam running the new 4.0 version. i followed this guide,...
View ArticleGuidance LVM NFS
Hi all, Just a slight issue I'm having not serious just need some clarity. Currently I have 1 backup test server with LVM shared called VG0 and it has NFS setup. Now I have another server called...
View ArticleHow can i do a complete cluster shutdown?
I have a 3.4 Proxmox Cluster system with 3 nodes. During a power failure, the nodes must shut down sequentially. Now it happened that the last node is not completely shut down, because quorum error....
View ArticleSeparate Cluster Network wiki page
Hello - I just noticed the new https://pve.proxmox.com/wiki/Separate_Cluster_Network wiki page and have a question. The /etc/hosts file does not go along with later parts like: Code: pvecm create...
View ArticleCPU - Units proxmox versioni :4.0-48/0d8559d0
So after you create a VPS 2 CPU to CPU Units is worth 1024 soup that was created VPS ull I connect to it and write command cat / proc / cpuinfo and instead to show me two CPU shows me 16 CPU that so I...
View ArticleOutdated kernel sources @ git.proxmox.com? (Proxmox VE 4.0)
Hi, I'm not very much into compiling and sources, so if this post is fundamentally wrong for some reason, sorry in advance. For example I sense that may be using "Ubuntu-4.2.0-14.16" sources along with...
View Articleheres a vmware packer template for testing
https://gist.github.com/xahare/116034564973ab7648cb have fun.
View Articleha-Questions in pve4
Hi, i installed two nodes with proxmox 4 for testing the new features and prepare myself to migrate the older clusters to the new version. So i'm currently trying to break the cluster. one thing i...
View Articleconverting from raw to qcow2
HiTeam, I have a windows 2008 vm with 60 GB as raw disk. Now i converted that dist to qcow2 and the physical size is 55GB. When I create the new disk to qcow2 format should i create it as 60 gb or...
View ArticleNexenta/Illumos-based slow
Has anyone managed to get this working? With or withour Virtio disks/nic's it just takes ages to get into the webinterface CPU : AMD FX8320 , 16 Gigs of ram pveversion -v proxmox-ve: 4.0-16 (running...
View ArticleVM monitoring
HI, Is there any command to monitor VM like virt-top of SolusVM??? http://prntscr.com/8sj2t6 Take a look at this pictures please. Thanks in advance.
View ArticleMy HP server has two Lan , but only connect to UI with one Lan
I install Proxmox 4 and I have HP server , my HP server has two Lan card , in first installation , I can not connect to UI . and can not ping my system . so I plug cable to another Lan card , and I can...
View ArticleLXC restore error in 4.0-48
Hi! I did a container backup and then a restore. There is the following error: Code: Formatting '/var/lib/vz/images/1002/vm-1002-disk-1.raw', fmt=raw size=10485760 mke2fs 1.42.12 (29-Aug-2014)...
View ArticleProblem with hostname on LXC
Hi, I know this is an old topic, but from openvz to LXC somethings seems to have changed. I'm running a VM on CentOS 6.7 inside Proxmox 4 and I'm having a little problem with cPanel running inside that...
View ArticleDebian container unable to start after migration from OpenVZ to LXC on Proxmox 4
After migrating a Debian 7 OpenVZ CT from Proxmox 3 to a LXC on Proxmox 4 it does not appear to start correctly. Fristly, migration was done by stopping the container on Proxmox 3, backing up to...
View ArticleProxmox 3.4 upgrade failure, stuck in busybox due to ZFS
Hi, after upgrading Proxmox 3.4 and rebooting, the system got stuck in busybox, failing to boot with: Code: Error: Failed to mount root filesystem 'rpool/ROOT/pve-1/' When checking with 'mount', rpool...
View ArticleTASK ERROR: missing 'arch' at 4.0 lxc container
Dear I am testing upgrade from 3.4 to 4.0 around openVZ container CentOs base. I backuped the CT at 3.4, and I restored the file in 4.0. The restoring was OK, however an error came at starting 4.0 CT....
View ArticleAMD and Intel in one Cluster
Hi, is it possible to combine these both processors inside one cluster and use all of the features (like HA)? kind regards
View Article