subscription question
Hi, Do I understand right, that if I have 2 CPUs I have to upload 2 keys? Or there should be some single special key for 2 CPU installations?
View ArticleProxmox on an HP ProLiant DL360p with 331FLR / Broadcom 5719 NIC
We would like to purchase new hypervisor hardware, and would like the hardware to be supported out-of-box by Proxmox. Currently we are looking at HP ProLiant DL360p (Gen8) servers (2x Intel Xeon...
View ArticleClik here to view.
Web Update Tab shows Updates from packages were not installed
Hello, after moving to proxmox 3.1 the update tab shows updates from packages were not installed on the server. proxmox update errror.jpg Code: aptitude install libsalck3 Die folgenden NEUEN Pakete...
View ArticleBackups started failing
Hi running PVE 2.3-13 I experienced a virt server running really slowly so I shut down both guest servers and rebooted the host server. Since then, the nightly backups (to USB disk) have failed with:...
View ArticlePaid support question
Hi Proxmox! I have the following question, we have few machines with virtualisation. We need to upgrade them to PVE 3 latest and propose a better configuration for maybe glusterfs setup. We need...
View Articleiptables disabled by default
Hello again, I remember I asked this question some time ago, but don't remember if it was fully answered (means not). the iptables is disabled after the installation and the reason is: security. Could...
View ArticleClik here to view.
Windows 7 on KVM doesn't work anymore ...
Before I upgraded to Proxmox 3.1 I shot down all VM's. After the update to Proxmox 3.1 I startet all VM's again and all runs very fine without one exception: the vm contailing the windows 7...
View ArticleA suggestion to "normal" proxmox: lm-sensors
Hi to vienna from Germany ... I miss more information about the server running Proxmox. Is ist pssible to integrate lm-sensores (or better tools)? If yes, my be you can implement an alert e-mail tozhe...
View ArticleSupport, what is included ?
Hello, I've read the subscription agreement and saw : We do not support modified packages, third party software, community projects upon which our releases are based on, code development, system and...
View ArticleMulticast on container with Proxmox VE 2.3
Hi, Noting that a VPS didnt receive every network transmissions, i investigated about multicast forwarding capabilities in bridged network interface. I was surprised to note simultaneous tcpdump...
View ArticleUpgrade procedure :3.0 to 3.1 "pve-no-subscription"
Call me dense, but could someone please post the exact procedure to upgrade a node from 3.0 to 3.1 with the "no subscription" repository. Probably thinking its a bit more than "apt-get update; apt-get...
View ArticleIssue with Privileges
Hello, First I have to commend the Proxmox staff for the work to get to 3.1. It is sweet. I am not sure if this is an issue with privileges or custom roles, I want to give users the ability to browse...
View Articleproblem with built-in nmap
when i run nmap, it shows: root@hevelius:~# nmap proxmox.com Starting Nmap 6.00 ( http://nmap.org ) at 2013-08-23 10:50 CEST route_dst_netlink: can't find interface "vmbr0" clear instalation,...
View ArticlePhase0_exception BSOD after 3.1 upgrade
After upgrading to version 3.1 any Win 2008 server or Win 7 VM that was restarted, they would BSOD on Phase0_exception. Booting from the installation CD would result in the same error. I tried changing...
View ArticleWeb interface dosent work on fresh install of PVE 3.1
I installed Proxmox VE 3.1 e1f08ccd-6 today with USB on bearmetall. No error during install, everything seems to be OK. When I login to https://<ip>:8006 I get the warning from my browser about...
View ArticleEnabling VT-d in Proxmox to a Solaris guest
I have a VMware environment that I use as an all-in-one with a Solaris guest providing storage to the VMware host. This is possible because I can pass through the PCI JBOD controller to the Solaris VM...
View ArticleFencing Dell C6100
So, here is my configuration: Dell PowerEdge C6100 with BMC set to dedicated. They are connected to the same network as the LAN on Proxmox. Null user has been given no access, root user has had...
View ArticleRestore VM's from failed server
I have a proxmox server that will not start back up. In an effort to bring the VM's back online quickly I mounted the drive and copied the critcal VM's out of /dev/pve/data, copied the entire...
View ArticlePVE 3.1 & Cluster with fencing
Hi, I have installed two servers with proxmox pve 3.1 and have configurate them with HA disponibility with a fence device (APC). All works fine, the servers can communicate with fence device... But,...
View ArticleProxmox upgrade from 2.2
Hello, we have two proxmox servers in our office. Not clustered. One is running version pve-manager/2.2/3089a616The other is running version pve-manager/2.3/7946f1f1 I'm planning an upgrade of both...
View Article