Hello everybody,
On a supermicro server with 4 hards drives I have installed debian 7.8 with 3 raid.
md2 : ready for drbd
md3 : mounted on boot
md4 : PVE volume group with root, swap and data logical volumes.
I have follow install procedure from a debian install.
All is ok with 2.6 kernel.
I have installed 3.10-5 kernel.
If i boot with 3.10-5, i have the error in screenshot. But system load. I can open an ssh session.
Test with 3.10-7, same error.
Sometime, it's a little different error.
boot with 2.6 is ok.
I searched on the internet, without success.
Have you got an idea ?
Where i must looking for ?
Thank you :)
On a supermicro server with 4 hards drives I have installed debian 7.8 with 3 raid.
md2 : ready for drbd
md3 : mounted on boot
md4 : PVE volume group with root, swap and data logical volumes.
I have follow install procedure from a debian install.
All is ok with 2.6 kernel.
I have installed 3.10-5 kernel.
If i boot with 3.10-5, i have the error in screenshot. But system load. I can open an ssh session.
Test with 3.10-7, same error.
Sometime, it's a little different error.
boot with 2.6 is ok.
I searched on the internet, without success.
Have you got an idea ?
Where i must looking for ?
Thank you :)
Code:
root@proxmox01:~# lvscan ACTIVE '/dev/pve/root' [65,19 GiB] inherit
ACTIVE '/dev/pve/swap' [59,60 GiB] inherit
ACTIVE '/dev/pve/data' [1,70 TiB] inheritCode:
root@proxmox01:~# df -a
Sys. fich. 1K-blocks Util. Disponible Uti% Monté sur
rootfs 67153528 1573768 62145472 3% /
sysfs 0 0 0 - /sys
proc 0 0 0 - /proc
udev 10240 0 10240 0% /dev
devpts 0 0 0 - /dev/pts
tmpfs 1639336 352 1638984 1% /run
/dev/mapper/pve-root 67153528 1573768 62145472 3% /
tmpfs 5120 0 5120 0% /run/lock
tmpfs 3278660 12432 3266228 1% /run/shm
fusectl 0 0 0 - /sys/fs/fuse/connections
/dev/md3 943544 83720 794676 10% /boot
/dev/mapper/pve-data 1792834824 19789632 1681951384 2% /var/lib/vz
rpc_pipefs 0 0 0 - /var/lib/nfs/rpc_pipefs
/dev/fuse 30720 12 30708 1% /etc/pve
