iscsi LVM fails after boot of the host

Hi,

I have the following scenario:

I have a cluster (non-HA) that has an iSCSI LVM that contains VMs. One of the Proxmox hosts had to be reinstalled due to disk errors. After I reinstalled it (3.2.2/82599a65 version), I had it re-join the domain with the "pvecm add <existing cluster member IP>" command. The node seemed to join successfully and I can see the iSCSI LVM mentioned in the storage for the node that rejoined the cluster. The problem is that whenever I restart the node I see the error:

No volume groups found
No volume groups found
No volume groups found
Volume group "nas-iscsi-vg" not found
TASK ERROR: can't activate LV '/dev/nas-iscsi-vg/vm-112-disk-1': Skipping volume group nas-iscsi-vg


The weird thing is that after a min or so if I ask to start the VM that failed, it doesn't have a problem. It's just at boot time.
If I examine the storage, it can see the LVM, it can detect correctly the available space, etc.
I've compared as many settings as I can between the other nodes and this one (vgscan, lvscan, /etc/pve/storage.cfg) and I can't find out what might be the issue

Any ideas?

Thanks in advance