Proxmox Two-Node High Availability cluster problems with Quorum Disk

Hi All,


I have managed to configure the Two node cluster and assign a Quorum disk to a Third server using an iscsi target.


In the work-through outlined in:- http://forum.proxmox.com/threads/163...ive-migrations


The iscsaidm example for connecting to the iscsi target is not persistent and does not survive a reboot on either of the Proxmox Cluster Nodes.



I therefore decided to set-up the iscsi target in Proxmox storage assigning it to both nodes.



After a reboot the primary node can see the Quorum disk and a clustat shows the Quorum disk.



However on the Secondary node the Quorum check fails on boot.



If I run /etc/init.d/cman reload on the secondary node I can then see the Quorum Disk when using clustat.



It therefore looks like the iscsi target is mounted after Proxmox checks for the Quorum disk on boot.



The Quorum disk is mounted on the primary server before it checks for it.



Is this problem due to the way Proxmox starts clustering?



How do I mount the Quorum disk before Proxmox checks for it on each node?



Will adding iscsiadm -m node -T iqn.BLAHBLAH -p IPOFiSCSISERVER -l to the /etc/rc.local work?



Are there any benefits in running more than one Quorum disk on a two node Cluster?