Hi to all,
I have build a low power server with the Gigabyte GA-J1900N-D3V and a Samsung 120GB EVO ssd. The first problem that I encounter was the UEFI BIOS which did not boot from USB. After I turned on the legacy option I saw the USB drive that I had created to install Proxmox.
The installation went well and when all done I rebooted the machine. I see the GRUB loader for half a second and then the PC is rebooting again.
Also I installed from CDROM but the loop will not disappear.
Does anyone have a suggestion or a tip where to look next?
EDIT: When installing 2.1 in debug mode it hangs at:
BUG: unable to handle kernel NULL pointer dereferenceat (null)
IP: [ffffffffa003b7bd>] xhci_hub_control+0x37d/0xd20 [xhci_hcd]
PGD 23a633067 PUD 23a633067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci000:00/0000:00:14.0/usb1/dev
CPU1
Modules linked in: xhci_hcd(+) shpchp msdosfat
I have build a low power server with the Gigabyte GA-J1900N-D3V and a Samsung 120GB EVO ssd. The first problem that I encounter was the UEFI BIOS which did not boot from USB. After I turned on the legacy option I saw the USB drive that I had created to install Proxmox.
The installation went well and when all done I rebooted the machine. I see the GRUB loader for half a second and then the PC is rebooting again.
Also I installed from CDROM but the loop will not disappear.
Does anyone have a suggestion or a tip where to look next?
EDIT: When installing 2.1 in debug mode it hangs at:
BUG: unable to handle kernel NULL pointer dereferenceat (null)
IP: [ffffffffa003b7bd>] xhci_hub_control+0x37d/0xd20 [xhci_hcd]
PGD 23a633067 PUD 23a633067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci000:00/0000:00:14.0/usb1/dev
CPU1
Modules linked in: xhci_hcd(+) shpchp msdosfat