Quantcast
Channel: Proxmox Support Forum
Viewing all articles
Browse latest Browse all 171654

VLAN 1 NIC for VMs and administration

$
0
0
Hi, I'm trying to configure 2 nodes of a cluster. Heach node has 2 NIC.
I've thought to use NIC 1, of each node, as internal comunication (gluster..); NIC 2 of each node should be the bridge for the virtual machines.
Since VMs have different lan, I need to configure NIC 2 with vlan support; I've thought to use another vlan for management the nodes.
Here the configuration:

Code:

auto lo
iface lo inet loopback

auto bond0
iface bond0 inet manual
    slaves eth1
    bond_mode 0
    bond_xmit_hash_policy layer2
    bond_miimon 100
    bond_downdelay 0
    bond_updelay 0

#bridge for VMs
#auto vmbr0
#iface vmbr0 inet manual
 #  bridge_ports bond0
 #  bridge_stp off
 #  bridge_fd 0

# Management vlan
auto vmbr0v99
iface vmbr0v99 inet static
    address 192.168.99.3
    netmask 255.255.255.0
    network 192.168.99.0
    gateway 192.168.99.254
    bridge_ports bond0.99
    bridge_stp off
    bridge_fd 0

#Internal comunication
auto eth0
iface eth0 inet static 
    address 192.168.98.3
    netmask 255.255.255.0

With this configuration I can reach the node and from the node I can reach internet correctly (so the switch has the port tagged correctly).
But the VMs need a bridge like vmbr0 and If I enable this then I can't reach the node.

Furthermore from this http://188.165.151.221/threads/12850-Problems-with-VLAN-s
Code:

...
and if you create a vm, with network interface on vmbr1 + vlan tag 4, proxmox create a

vmbr1v4
iface vmbr1v4 inet manual
    bridge_ports bond0.4
    bridge_stp off
    bridge_fd 0

(not in /etc/network/interfaces, but directly in memory)

Is there any way to have a bonding vlan bridge with a management vlan for nodes?
Thanks.

Viewing all articles
Browse latest Browse all 171654

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>