Hi everyone.
For past few days I'm fighting with my proxmox config and cannot figure out how to fix it the way i want. I was trying to find the similar problems/questions people have but I couldn't find anything. If I'm wrong and there is an answer to my question please point me to it.
To the point.
Recently I've installed proxmox. I created five containers under one public ip (according to this tutorial http://www.ameir.net/blog/archives/5...p-address.html ). Now I decided to get second ip address. I would like to point it only to one of the containers. For now with both IPs i can access all the containers and I can't seem to get it right.
Below is my config (changed it milion times, tried a lot of things but nothing works).
I've tried adding vmbr2 with the second IP but did not succeed.
Is there a way to seperate those two IP address? When I add IP address 192.168.1.244 to one of the containers i can ssh to it directly but so i can do it to all the other containers when i specify the port.
For past few days I'm fighting with my proxmox config and cannot figure out how to fix it the way i want. I was trying to find the similar problems/questions people have but I couldn't find anything. If I'm wrong and there is an answer to my question please point me to it.
To the point.
Recently I've installed proxmox. I created five containers under one public ip (according to this tutorial http://www.ameir.net/blog/archives/5...p-address.html ). Now I decided to get second ip address. I would like to point it only to one of the containers. For now with both IPs i can access all the containers and I can't seem to get it right.
Below is my config (changed it milion times, tried a lot of things but nothing works).
Code:
# network interface settings
auto lo
iface lo inet loopback
iface eth5 inet manual
auto eth4
iface eth4 inet manual
auto vmbr0
iface vmbr0 inet static
pre-up iptables-restore < /etc/iptables.rules
address 192.168.1.229
netmask 255.255.255.192
gateway 192.168.1.254
bridge_ports eth4
bridge_stp off
bridge_fd 0
auto vmbr0:0
iface vmbr0:0 inet static
address 10.0.0.1
netmask 255.255.255.0
network 10.0.0.0
brodcast 10.0.0.255
#pre-up iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -o vmbr0 -j MASQUERADEIs there a way to seperate those two IP address? When I add IP address 192.168.1.244 to one of the containers i can ssh to it directly but so i can do it to all the other containers when i specify the port.
