Hi
I've got some big problems with my proxmox setup.
Generally all works fine now, at the beginning i got some more problems with software-raid setup. Now I've changed that to an Areca ARC-1680 hardware RAID-controller with 4 Intel SSDs in a RAID 5 setup, which seems to work fine...for the first.. Everything is running on a Supermicro 1027R-N3RF Server.
Now there is a problem when copying some big files/many files at same time, i.e. when cloning a machine.
In /var/log/messages i get errors like the following
Proxmox then is completely unuasable. I/O-Load is too high to do something other..every other thingts u wanna do in that moment doesnt work, not even a ssh-connection i.e.
Does anyone has some experience with this kind of problem?
Thank you for your fast responce!
Kind regards
Sergio
I've got some big problems with my proxmox setup.
Generally all works fine now, at the beginning i got some more problems with software-raid setup. Now I've changed that to an Areca ARC-1680 hardware RAID-controller with 4 Intel SSDs in a RAID 5 setup, which seems to work fine...for the first.. Everything is running on a Supermicro 1027R-N3RF Server.
Now there is a problem when copying some big files/many files at same time, i.e. when cloning a machine.
In /var/log/messages i get errors like the following
Code:
kernel: arcmsr0: abort device command of scsi id = 0 lun = 0
kernel: arcmsr0: wait 'abort all outstanding command' timeout
kernel: arcmsr0: executing hw bus reset .....
kernel: Areca RAID Controller0: F/W V1.51 2012-07-04 & Model ARC-1680
kernel: arcmsr0: abort device command of scsi id = 0 lun = 0Does anyone has some experience with this kind of problem?
Thank you for your fast responce!
Kind regards
Sergio