Hi, i have troubles with my newly purchased SSD device OCZ RevoDrive 3 (RVD3-FHPX4-120G). I've installed it into the PCIeX raiser card slot, and booted my server up. As long as i can see, the device is listed in #lspci output.
But i don't have any block device initialized. Completely nothing in dmesg, related to OCZ or SSD or sdX devices.
I've downloaded official divers from the http://ocz.com/enterprise/download/drivers (Z-Drive R4 Linux Drivers). The version i chose download, was Ubuntu 10.04 LTS 2.6.32 62.7KB, because it suites my kernel most. I've installed it using dpkg -i oczpcie-ubuntu10.04-v4.0.551.x86_64.deb.
Later on, i modprobbed oczpcie oczvca modules into the kernel, but still have no device initialized in. I tried to load/unload mvsas module as well. Still no go.
Also this article says kernel 2.6.32 has the definitions for RevoDrive disks: http://cateee.net/lkddb/web-lkddb/SCSI_MVSAS.html
But my proxmox hardware node doesn't even try to initialize the PCIeX device.
I tried to install Ubuntu-server LTS 12.04.3 and my device works there:
Code:
root@ve1-ua:~# lspci | grep -i ocz 02:00.0 SCSI storage controller: OCZ Technology Group, Inc. Device 1021 (rev 02)I've downloaded official divers from the http://ocz.com/enterprise/download/drivers (Z-Drive R4 Linux Drivers). The version i chose download, was Ubuntu 10.04 LTS 2.6.32 62.7KB, because it suites my kernel most. I've installed it using dpkg -i oczpcie-ubuntu10.04-v4.0.551.x86_64.deb.
Later on, i modprobbed oczpcie oczvca modules into the kernel, but still have no device initialized in. I tried to load/unload mvsas module as well. Still no go.
Also this article says kernel 2.6.32 has the definitions for RevoDrive disks: http://cateee.net/lkddb/web-lkddb/SCSI_MVSAS.html
But my proxmox hardware node doesn't even try to initialize the PCIeX device.
Code:
root@ve1-ua:~# pveversion -v
proxmox-ve-2.6.32: 3.1-114 (running kernel: 2.6.32-26-pve)
pve-manager: 3.1-24 (running version: 3.1-24/060bd5a6)
pve-kernel-2.6.32-20-pve: 2.6.32-100
pve-kernel-2.6.32-19-pve: 2.6.32-96
pve-kernel-2.6.32-16-pve: 2.6.32-82
pve-kernel-2.6.32-22-pve: 2.6.32-107
pve-kernel-2.6.32-17-pve: 2.6.32-83
pve-kernel-2.6.32-26-pve: 2.6.32-114
pve-kernel-2.6.32-18-pve: 2.6.32-88
pve-kernel-2.6.32-23-pve: 2.6.32-109
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-2
pve-cluster: 3.0-8
qemu-server: 3.1-8
pve-firmware: 1.0-23
libpve-common-perl: 3.0-9
libpve-access-control: 3.0-8
libpve-storage-perl: 3.0-18
pve-libspice-server1: 0.12.4-2
vncterm: 1.1-6
vzctl: 4.0-1pve4
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-17
ksm-control-daemon: 1.1-1
glusterfs-client: 3.4.1-1Code:
root@vox2-clu-ua:~# uname -a
Linux vox2-clu-ua 3.8.0-34-generic #49~precise1-Ubuntu SMP Wed Nov 13 18:05:00 UTC 2013 x86_64 x86_64 x86_64 GNU/LinuxCode:
root@vox2-clu-ua:~# hdparm -I /dev/sdd
/dev/sdd:
ATA device, with non-removable media
Model Number: OCZ-REVODRIVE3
Serial Number: OCZ-OD3Q24W51H54MCVF
Firmware Revision: 2.25
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x0110)
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 117231408
LBA48 user addressable sectors: 117231408
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 57241 MBytes
device size with M = 1000*1000: 60022 MBytes (60 GB)
cache/buffer size = unknown
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
Write-Read-Verify feature set
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* unknown 76[14]
* unknown 76[15]
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Data Tables (AC5)
* SET MAX SETPASSWORD/UNLOCK DMA commands
* Data Set Management TRIM supported (limit 1 block)
* Deterministic read data after TRIM
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
2min for SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5e83a976b45d4d03
NAA : 5
IEEE OUI : e83a97
Unique ID : 6b45d4d03
Checksum: correctCode:
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.144328] scsi0 : mvsas
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.152940] sas: phy-0:2 added to port-0:0, phy_mask:0x4 ( 200000000000000)
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.152956] sas: phy-0:3 added to port-0:1, phy_mask:0x8 ( 300000000000000)
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.152973] sas: DOING DISCOVERY on port 0, pid:253
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.152975] sas: DONE DISCOVERY on port 0, pid:253, result:0
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.152979] sas: DOING DISCOVERY on port 1, pid:253
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.152991] sas: DONE DISCOVERY on port 1, pid:253, result:0
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.152996] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.153001] sas: ata7: end_device-0:0: dev error handler
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.319865] ata7.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.328236] ata7.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.339861] ata7.00: configured for UDMA/133
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.348378] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.364553] scsi 0:0:0:0: Direct-Access ATA OCZ-REVODRIVE3 2.25 PQ: 0 ANSI: 5
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.373342] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.373387] sas: ata7: end_device-0:0: dev error handler
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.373418] sas: ata8: end_device-0:1: dev error handler
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.539942] ata8.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.548693] ata8.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.559941] ata8.00: configured for UDMA/133
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.568661] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.584451] scsi 0:0:1:0: Direct-Access ATA OCZ-REVODRIVE3 2.25 PQ: 0 ANSI: 5
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.593382] sd 0:0:0:0: [sdd] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.593400] sd 0:0:0:0: Attached scsi generic sg3 type 0
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.593631] sd 0:0:1:0: [sde] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.593653] sd 0:0:1:0: Attached scsi generic sg4 type 0
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.593691] sd 0:0:1:0: [sde] Write Protect is off
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.593692] sd 0:0:1:0: [sde] Mode Sense: 00 3a 00 00
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.593698] sd 0:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.594423] sde: unknown partition table
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.594518] sd 0:0:1:0: [sde] Attached SCSI disk
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.663613] sd 0:0:0:0: [sdd] Write Protect is off
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.672274] sd 0:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.672292] sd 0:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.683178] sdd: unknown partition table
Dec 19 14:59:31 vox2-clu-ua kernel: [ 8.692024] sd 0:0:0:0: [sdd] Attached SCSI diskCode:
root@vox2-clu-ua:~# modinfo mvsas
filename: /lib/modules/3.8.0-34-generic/kernel/drivers/scsi/mvsas/mvsas.ko
license: GPL
version: 0.8.16
description: Marvell 88SE6440 SAS/SATA controller driver
author: Jeff Garzik <jgarzik@pobox.com>
srcversion: 8C2F663CC279D2FBBDE5EDD
alias: pci:v00001B85d00001084sv*sd*bc*sc*i*
alias: pci:v00001B85d00001083sv*sd*bc*sc*i*
alias: pci:v00001B85d00001080sv*sd*bc*sc*i*
alias: pci:v00001B85d00001044sv*sd*bc*sc*i*
alias: pci:v00001B85d00001043sv*sd*bc*sc*i*
alias: pci:v00001B85d00001042sv*sd*bc*sc*i*
alias: pci:v00001B85d00001041sv*sd*bc*sc*i*
alias: pci:v00001B85d00001040sv*sd*bc*sc*i*
alias: pci:v00001B85d00001022sv*sd*bc*sc*i*
alias: pci:v00001B85d00001021sv*sd*bc*sc*i*
alias: pci:v00001B4Bd00009485sv*sd00009480bc*sc*i*
alias: pci:v00001B4Bd00009445sv*sd00009480bc*sc*i*
alias: pci:v00001B4Bd00009480sv*sd00009480bc*sc*i*
alias: pci:v00001103d00002760sv*sd*bc*sc*i*
alias: pci:v00001103d00002744sv*sd*bc*sc*i*
alias: pci:v00001103d00002740sv*sd*bc*sc*i*
alias: pci:v00001103d00002722sv*sd*bc*sc*i*
alias: pci:v00001103d00002721sv*sd*bc*sc*i*
alias: pci:v00001103d00002720sv*sd*bc*sc*i*
alias: pci:v00001103d00002710sv*sd*bc*sc*i*
alias: pci:v00009005d00000450sv*sd*bc*sc*i*
alias: pci:v000017D3d00001320sv*sd*bc*sc*i*
alias: pci:v000017D3d00001300sv*sd*bc*sc*i*
alias: pci:v000011ABd00009180sv*sd*bc*sc*i*
alias: pci:v000011ABd00009480sv*sd*bc*sc*i*
alias: pci:v000011ABd00006485sv*sd*bc*sc*i*
alias: pci:v000011ABd00006440sv*sd*bc*sc*i*
alias: pci:v000011ABd00006440sv*sd00006480bc*sc*i*
alias: pci:v000011ABd00006340sv*sd*bc*sc*i*
alias: pci:v000011ABd00006320sv*sd*bc*sc*i*
depends: libsas,scsi_transport_sas
intree: Y
vermagic: 3.8.0-34-generic SMP mod_unload modversions
parm: collector:
If greater than one, tells the SAS Layer to run in Task Collector
Mode. If 1 or 0, tells the SAS Layer to run in Direct Mode.
The mvsas SAS LLDD supports both modes.
Default: 1 (Direct Mode).
(int)