Hi there, having a huge issue with 2008 R2 server.
Migrating from ESXi, exactly the same hardware.
I'm just moving the disk image into a new Proxmox VM and trying to get into windows to redetect hardware.
To start with, anytime I put a 64 bit cpu, it bluescreens before getting to desktop with an 0x0000005D error.
I managed to get around that by putting either kvm32, or qemu32 for the processor, but after "Windows is loading files.. " but before it gets to desktop, it reboots itself and goes back to bios.
Things I've tried
Since I have tested so many things the vm config doesn't really reflect current settings, but at this point I've pretty much tried everything
Any help is appreciated.
Machine Config
Migrating from ESXi, exactly the same hardware.
I'm just moving the disk image into a new Proxmox VM and trying to get into windows to redetect hardware.
To start with, anytime I put a 64 bit cpu, it bluescreens before getting to desktop with an 0x0000005D error.
I managed to get around that by putting either kvm32, or qemu32 for the processor, but after "Windows is loading files.. " but before it gets to desktop, it reboots itself and goes back to bios.
Things I've tried
- Changing the cpu from any of the 64 bit capable definitions to the two availiable 32 bit definitions, (*Ninja edit: and disabling KVM hardware virtualization) this stops the 0x0000005D error but does not allow me to get into the desktop. (Boot loop) I find this strange since 2008 R2 requires a 64 bit capable processor. \
- Also, the "host" definition for cpu is missing in PVE3.
- Changed the storage adapter, I have tried virtio, scsi and ide.
- Installed all updates from pve-test as of tonight and tried as many settings to see if I could get the right combo. No luck.
- Downloaded and booted from this http://www.microsoft.com/en-us/downl....aspx?id=38435 to see if the recent MS updates are what was causing the issue. Strangely enough to get this iso to boot I had to reconfigure the cpu to a 64 capable one. Had no effect.
Since I have tested so many things the vm config doesn't really reflect current settings, but at this point I've pretty much tried everything
Any help is appreciated.
Machine Config
Code:
bootdisk: scsi0
cores: 2
cpu: kvm32
ide2: local:iso/KB2840165-Win7-RTM-SP1-X86.iso,media=cdrom,size=225766K
kvm: 0
memory: 2048
name: toad
net0: e1000=0A:C7:0D:06:8C:0B,bridge=vmbr0
ostype: win7
scsi0: local:103/vm-103-disk-1.qcow2,format=qcow2,cache=writeback,size=41G
sockets: 1
vga: stdCode:
pve-manager: 3.0-23 (pve-manager/3.0/957f0862)
running kernel: 2.6.32-22-pve
proxmox-ve-2.6.32: 3.0-107
pve-kernel-2.6.32-20-pve: 2.6.32-100
pve-kernel-2.6.32-22-pve: 2.6.32-107
lvm2: 2.02.95-pve3
clvm: 2.02.95-pve3
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-1
pve-cluster: 3.0-4
qemu-server: 3.0-25
pve-firmware: 1.0-23
libpve-common-perl: 3.0-4
libpve-access-control: 3.0-6
libpve-storage-perl: 3.0-9
vncterm: 1.1-4
vzctl: 4.0-1pve3
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-13
ksm-control-daemon: 1.1-1Code:
root@proxmox:/etc/pve/qemu-server# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Pentium(R) Dual-Core CPU E6700 @ 3.20GHz
stepping : 10
cpu MHz : 3205.412
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dts tpr_shadow vnmi flexpriority
bogomips : 6410.82
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Pentium(R) Dual-Core CPU E6700 @ 3.20GHz
stepping : 10
cpu MHz : 3205.412
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dts tpr_shadow vnmi flexpriority
bogomips : 6410.82
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management: