Hello,
I have a two Node Cluster setup and trying to test offline migration of a 20G KVM VM but it seems the migration is taking about 30 mins to complete whether I create the VM with a RAW or a QCOW2 image. I tried googling and checking thru the mailing list and the forum but I haven't come up with anything concrete so hence my post here.
The VM is using Virtio for both Hard Disk and Network. It was created with QCOW2 and cache=writeback, 4 vCPU Cores and 2GB Ram.
Each Node has the following Hardware specs:
Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz
16GB Ram
2 x 1TB Drive RAID 0
Raid Card - 3ware Inc 9650SE SATA-II
2 x 1Gb/s NICs (but only 100 Mb/s uplink)
Both Nodes are the same VLAN.
I tried to put as much information as possible but let me know if I missed anything.
Thank you all in advance.
Samwayne
I have a two Node Cluster setup and trying to test offline migration of a 20G KVM VM but it seems the migration is taking about 30 mins to complete whether I create the VM with a RAW or a QCOW2 image. I tried googling and checking thru the mailing list and the forum but I haven't come up with anything concrete so hence my post here.
The VM is using Virtio for both Hard Disk and Network. It was created with QCOW2 and cache=writeback, 4 vCPU Cores and 2GB Ram.
Code:
Migration task log
Jun 24 22:44:54 starting migration of VM 100 to node 'NodeA'
Jun 24 22:44:54 copying disk images
vm-100-disk-1.qcow2
rsync status: 32768 0% 0.00kB/s 0:00:00
rsync status: 224231424 1% 11.14MB/s 0:31:04
rsync status: 435585024 2% 11.16MB/s 0:30:41
rsync status: 646840320 3% 11.16MB/s 0:30:23
rsync status: 869203968 4% 11.14MB/s 0:30:06
rsync status: 1079705600 5% 11.12MB/s 0:29:51
.
.
.
rsync status: 20406534144 95% 11.18MB/s 0:01:33
rsync status: 20629192704 96% 11.14MB/s 0:01:14
rsync status: 20840218624 97% 11.13MB/s 0:00:55
rsync status: 21051637760 98% 11.18MB/s 0:00:37
rsync status: 21274722304 99% 11.17MB/s 0:00:17
rsync status: 21478375424 100% 11.15MB/s 0:30:36 (xfer#1, to-check=0/1)
sent 21480997377 bytes received 31 bytes 11690338.73 bytes/sec
total size is 21478375424 speedup is 1.00
Jun 24 23:15:49 migration finished successfuly (duration 00:30:55)
TASK OKIntel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz
16GB Ram
2 x 1TB Drive RAID 0
Raid Card - 3ware Inc 9650SE SATA-II
2 x 1Gb/s NICs (but only 100 Mb/s uplink)
Both Nodes are the same VLAN.
Code:
# pveperf
CPU BOGOMIPS: 54400.16
REGEX/SECOND: 1537301
HD SIZE: 94.49 GB (/dev/mapper/pve-root)
BUFFERED READS: 185.44 MB/sec
AVERAGE SEEK TIME: 8.19 ms
FSYNCS/SECOND: 40.49
DNS EXT: 67.50 ms
DNS INT: 107.50 ms (mycluster.com)Code:
root@nodea:~# dd if=/dev/zero of=/tmp/output.img bs=8k count=256k
262144+0 records in
262144+0 records out
2147483648 bytes (2.1 GB) copied, 2.53249 s, 848 MB/sThank you all in advance.
Samwayne