Hello,
I understand that Proxmox 2 does not support Software RAID however I only realised that now, long after installing Proxmox using the image given from the DataCenter (Hetzner). Does this mean that the system is not protected against failure of either of the disks?
I am running WEBMIN for simple server admin functions and under the HARDWARE> Linux RAID menu I see this:
---
Linux RAID
Using MDADM version 3.1.4
---
The system has 2 x 3TB hard drives.
I did nothing during the initial server setup apart from choosing the partitions.
Should I worry about it?
I understand that Proxmox 2 does not support Software RAID however I only realised that now, long after installing Proxmox using the image given from the DataCenter (Hetzner). Does this mean that the system is not protected against failure of either of the disks?
I am running WEBMIN for simple server admin functions and under the HARDWARE> Linux RAID menu I see this:
---
Linux RAID
Using MDADM version 3.1.4
| Device name |
Active? | RAID level | Usable size | Member disk devices |
| /dev/md0 | Yes | Mirrored (RAID1) | 511.99 MB | /dev/sda1 | /dev/sdb1 |
| /dev/md1 | Yes | Mirrored (RAID1) | 1.46 TB | /dev/sda2 | /dev/sdb2 |
| /dev/md2 | Yes | Mirrored (RAID1) | 1.17 TB | /dev/sda3 | /dev/sdb3 |
The system has 2 x 3TB hard drives.
I did nothing during the initial server setup apart from choosing the partitions.
Should I worry about it?