Hello together,
I have got a new server and I want to setup the network on it.
The main-ip address of the host is 84.200.193.130.
The rest of the /26 Subnet (131-190) should be available for the virtual machines.
If I setup a OpenVZ machine - the network works perfect.
But if I try to use KVM, the machine seems to not get any network connectivity!
/etc/network/interfaces on host:
And on my Windows- or Linux-Guest in KVM I setted up:
But on both - Windows and Linux - the VM isn't able to get any connection!
What did I do wrong?
Thanks for your help! :D
I have got a new server and I want to setup the network on it.
The main-ip address of the host is 84.200.193.130.
The rest of the /26 Subnet (131-190) should be available for the virtual machines.
If I setup a OpenVZ machine - the network works perfect.
But if I try to use KVM, the machine seems to not get any network connectivity!
/etc/network/interfaces on host:
Code:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 84.200.193.130
gateway 84.200.193.129
netmask 255.255.255.192
auto vmbr0
iface vmbr0 inet static
address 84.200.193.130
netmask 255.255.255.192
bridge_ports none
bridge_fd 0
bridge_stp off
route add -host 84.200.193.128/26 dev vmbr0Code:
IP-Address: 84.200.193.131
Netmask: 255.255.255.192
Gateway: 84.200.193.130What did I do wrong?
Thanks for your help! :D