When running VMs I'm having issues getting connectivity to the outside network.
My end goal is to have a private VM network on 192.168.100.* and an external facing network on 172.16.10.*, and both will be physically connected on separate switches but for testing right now everything is connected to one switch.
My interfaces configuration on one of the servers is:
In the VM is have two realtek NICs, one for each bridge. I'm not getting DHCP on either interface. When I assign an IP to the VM vmbr0 NIC (192.168.100.1) I can ping the virtual machine host (192.168.100.90) but nothing else on the network.
Any suggestions on how to move forward?
Thanks!
My end goal is to have a private VM network on 192.168.100.* and an external facing network on 172.16.10.*, and both will be physically connected on separate switches but for testing right now everything is connected to one switch.
My interfaces configuration on one of the servers is:
Code:
# network interface settingsauto lo
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet manual
iface eth2 inet manual
iface eth3 inet manual
auto bond0
iface bond0 inet manual
slaves eth2 eth3
bond-mode 0
bond-miimon 100
bond-downdelay 200
bond-updelay 200
auto bond1
iface bond1 inet manual
slaves eth0 eth1
bond-mode 0
bond-miimon 100
bond-downdelay 200
bond-updelay 200
auto vmbr0
iface vmbr0 inet static
address 192.168.100.90
netmask 255.255.255.0
gateway 192.168.100.10
bridge_ports bond0
bridge_stp off
bridge_fd 0
auto vmbr1
iface vmbr1 inet manual
bridge_ports bond1
bridge_stp off
bridge_fd 0Any suggestions on how to move forward?
Thanks!